Shiro SD8101 user manual To reset base, To Set Dial Mode

Page 20

User Manual

To Set Dial Mode

You can change dial mode to TONE or PULSE dialing.

To set dial mode:

1.Press MENU button, then UP/DOWN button to the location

BASESET.

2.Press the PHONEBOOK button, the display shows PIN?

3.Key in your PIN number and press the PHONEBOOK button, then press UP/DOWN button to the location DIAL MODE.

4.Press UP/DOWN button to change Dial mode as TONE or PULSE dialing.

To reset base

1.Press MENU button, then UP/DOWN button to the location

BASESET.

2.Press the PHONEBOOK button, the display shows PIN?

3.Key in your PIN number and press the PHONEBOOK button, then UP/DOWN button to the location B RESET.

4.Press PHONEBOOK button, then the display shows RESET?

5.Press PHONEBOOK button to confirm, or Press CLEAR button, and go back to B RESET.

To change base PIN

1.Press MENU button, then UP/DOWN button to the location

BASESET.

2.Press the PHONEBOOK button, the display shows PIN?

3.Key in your PIN number and press the PHONEBOOK button, then UP/DOWN button to the location SET PIN? or MAST PIN?

4.Press the PHONEBOOK button, the display shows PIN?.

5.Key in the new PIN number, and press PHONEBOOK button, the display shows PIN?

6.Key in the new PIN number again, and press PHONEBOOK button to confirm.

19

Image 20

Contents SD8101 Contents What the symbols mean Handset and base unit Phonebook buttonSetting up your telephone Radio signals between handset and base unitConnection and conditions for use How many phones can you connect?Whats in this pack Installation Choose a suitable site for the base unitCharger pod does not have a connection to the telephone line Important safety information Warranty Information Making and answering calls Phone Book Muting the mouthpieceTo store a number into phonebook To clear a number from phonebookCall Logs To modify change a number in phonebookTo clear all numbers from phonebook To check call recordsHandset Setting Ringer Volume EXTRinger Volume INT Key tone on and offYour handset name Ringer Melody EXTRinger Melody INT To Lock /Unlock the keypad Display languageAuto Talk Base Setting Default PIN No To set call barring numberTo delete call barring number Base MelodyBase Volume Least call route LCR function OptionalPabx function To reset base To Set Dial ModeTo enter Baby call mode To exit Baby call modeBaby Call To set the Baby Call numberTo register a handset Resetting the systemHandset registration Intercom and transfer To make an intercom callTo end an intercom call To transfer a callTroubleshooting Handset does not ringHandset’s battery are running low within an hour or two Electrical power Technical DetailsDeclaration of Conformity