Shiro SD8101 user manual Charger pod does not have a connection to the telephone line

Page 8

User Manual

6.Connect the base unit to the telephone line Switch off power at the mains socket.

Insert the telephone line plug into the socket. Switch mains power back on.

Make sure the mains socket is switched on if you want to use the phone---it will not work without electrical power.

Use the plug to raise the shutter before pushing it into the socket

Note:

1. The charger pod does not have a connection to the telephone line.

2. The illustration of telephone's socket may vary from country to country.

7

Image 8
Contents SD8101 Contents What the symbols mean Handset and base unit Phonebook buttonSetting up your telephone Radio signals between handset and base unitConnection and conditions for use How many phones can you connect?Whats in this pack Installation Choose a suitable site for the base unitCharger pod does not have a connection to the telephone line Important safety information Warranty Information Making and answering calls Phone Book Muting the mouthpieceTo store a number into phonebook To clear a number from phonebookCall Logs To modify change a number in phonebookTo clear all numbers from phonebook To check call recordsHandset Setting Ringer Volume EXTRinger Volume INT Key tone on and offYour handset name Ringer Melody EXTRinger Melody INT To Lock /Unlock the keypad Display languageAuto Talk Base Setting Default PIN No To set call barring numberTo delete call barring number Base MelodyBase Volume Least call route LCR function OptionalPabx function To reset base To Set Dial ModeTo enter Baby call mode To exit Baby call modeBaby Call To set the Baby Call numberTo register a handset Resetting the systemHandset registration Intercom and transfer To make an intercom callTo end an intercom call To transfer a callTroubleshooting Handset does not ringHandset’s battery are running low within an hour or two Electrical power Technical DetailsDeclaration of Conformity