User Manual
Installation
1.Choose a suitable site for the base unit
Make sure it is not near to another telephone, nor to other electrical equipment.
2.Plug the mains power
lead and the telephone line cord into the rear of the base unit
3.Plug the mains adapter into a 230 V AC, 50 Hz mains socket, with the switch on the socket set to OFF
Note: The illustration of adaptor may vary from country to country.
4.Switch on mains power at the socket
5.Fit the battery in the handset(s)
Insert the battery pack as shown
Fit the battery compartment cover, Sliding it until it clicks firmly into position.
6