Shiro SD8101 user manual Handset’s battery are running low within an hour or two

Page 25

User Manual

Try a different location for the base unit, perhaps higher, or further from other electrical equipment.

Check the Battery Level symbol on the display. If it is low, replace the handset on the base unit to recharge the batteries.

Switch off power at the mains socket, wait for a few seconds and then switch back on.

8. "The handset’s battery are running low within an hour or two."

Before you used the handset for the first time, you should have left it on the base unit for up to 15 hours to charge the battery fully.

You may need to replace the battery.

9."Last Number Redial and/or memory dialing don't work on a PBX." When you first make a call, try press the # button for a pause between the outside line access digit and the telephone number.

You should later be able to redial the number.

10 "I cannot transfer a call."

Make sure the other handset is within range of the base unit, and is not busy on a call.

Make sure you are keying in the correct number for the other handset.

24

Image 25

Contents SD8101 Contents What the symbols mean Phonebook button Handset and base unitRadio signals between handset and base unit Setting up your telephoneConnection and conditions for use How many phones can you connect?Whats in this pack Choose a suitable site for the base unit InstallationCharger pod does not have a connection to the telephone line Important safety information Warranty Information Making and answering calls Muting the mouthpiece Phone BookTo store a number into phonebook To clear a number from phonebookTo modify change a number in phonebook Call LogsTo clear all numbers from phonebook To check call recordsRinger Volume EXT Handset SettingRinger Volume INT Key tone on and offRinger Melody INT Ringer Melody EXTYour handset name Auto Talk Display languageTo Lock /Unlock the keypad To set call barring number Base Setting Default PIN NoTo delete call barring number Base MelodyLeast call route LCR function Optional Base VolumePabx function To Set Dial Mode To reset baseTo exit Baby call mode To enter Baby call modeBaby Call To set the Baby Call numberHandset registration Resetting the systemTo register a handset To make an intercom call Intercom and transferTo end an intercom call To transfer a callHandset does not ring TroubleshootingHandset’s battery are running low within an hour or two Technical Details Electrical powerDeclaration of Conformity