Shiro SD8101 user manual Technical Details, Electrical power

Page 26

User Manual

Technical Details

Full DECT GAP Compatible system

Standard

 

Frequency range

1.88 to 1.9 GHz

Channel bandwidth

1.728 MHz

Modulation

GMSK

Operating range

Up to 300 m outdoors;

 

Up to 50 m indoors

Operating time

Standby time: 100 hours

 

Talking time: 8 hours

Temperature range

Operating 00C to 400C

 

Storage -200C to 600C

Electrical power

Handset---one 2.4 V 550 mAH NiMH,

 

rechargeable battery pack

 

Base unit---input 230 V AC, 50 Hz;

 

output AC 9 V, 300 mA.

PABX compatibility

Pause length: 3 seconds.

Signaling type: DTMF (dual-tone multifrequency) Pulse dialing

25

Image 26
Contents SD8101 Contents What the symbols mean Handset and base unit Phonebook buttonConnection and conditions for use Setting up your telephoneRadio signals between handset and base unit How many phones can you connect?Whats in this pack Installation Choose a suitable site for the base unitCharger pod does not have a connection to the telephone line Important safety information Warranty Information Making and answering calls To store a number into phonebook Phone BookMuting the mouthpiece To clear a number from phonebookTo clear all numbers from phonebook Call LogsTo modify change a number in phonebook To check call recordsRinger Volume INT Handset SettingRinger Volume EXT Key tone on and offYour handset name Ringer Melody EXTRinger Melody INT To Lock /Unlock the keypad Display languageAuto Talk To delete call barring number Base Setting Default PIN NoTo set call barring number Base MelodyBase Volume Least call route LCR function OptionalPabx function To reset base To Set Dial ModeBaby Call To enter Baby call modeTo exit Baby call mode To set the Baby Call numberTo register a handset Resetting the systemHandset registration To end an intercom call Intercom and transferTo make an intercom call To transfer a callTroubleshooting Handset does not ringHandset’s battery are running low within an hour or two Electrical power Technical DetailsDeclaration of Conformity