Samsung STD 12B, LCD 12B, LCD 24BI, STD 24B, 6B Locking Your Keyset, OFF-HOOK Voice Announcing Ohva

Page 37

LOCKING YOUR KEYSET

You can allow/disallow incoming/outgoing calls from your keyset using this option. There are three possible levelst:

1.Unlocked - you can use your keyset without restriction,

2.Locked all - prevents anyone from making or receiving calls from your keyset.

3.Locked out - prevents anyone from making an external call but allows incoming calls as normal.

While on-hook, press TRSF and then dial 100.

Dial your four digit station passcode.

Dial 0 for Unlock,

1for Locked out.

2for Locked all,

Press TRSF to store your selection.

NOTE: According to the status of your keyset, the following visual indication will be provided:

Unlock

as normal

Locked out

the HOLD key light will flash slowly.

Locked all

the HOLD key light will be on steady

OFF-HOOK VOICE ANNOUNCING (OHVA)

Keysets may receive a voice announcement while on another call. The calling station must be a display Keyset or have an OHVA key. The OHVA feature will work with all types of call.

To make an off-hook voice announcement:

Dial the extension number or press the DSS key.

When you receive a busy signal, press the OHVA key.

After the attention tone, begin speaking.

Finish the call by replacing handset or pressing the ANS/RLS key.

NOTES: 1. When you are voice announcing to a station close to you, use the handset to avoid an echo effect.

2.You cannot off-hook voice announce to single line telephones or Keysets in DND.

29

Image 37
Contents DCS System Access Codes LCD 24B STD 24B Publication Information Table of Contents Intercom Calls Dialling FeaturesCall Processing Paging and Messaging Convenience FeaturesCustomising Your Keyset Display FeaturesUser Orientation Things YOU should KnowCall Indications Speakerphone Volume ControlsHOT Keypad System TonesPage Labelling Programmable Keys LCD 24B or STD24B Keyset LayoutLCD 12B or STD12B Keyset Layout LCD 24Bi Keyset Layout 6B Enhancedkeyset Layout ADD-ON Moduleaom Layout Making AN Outside Call Outside CallsAnswering AN Outside Call Recall Dial Tone Universal Answer DeviceSending a Flash Busy Line Queuing with CALL-BACKIntercom Calls Calling Your System Operator Busy Station CAMP-ONSystem Hold Call ProcessingExclusive Hold Hold RecallTransferring Calls Retrieving Calls Held AT Another StationTransfer with CAMP-ON Conference Calls Call WaitingForward ALL Calls Forwarding CallsForward Busy Forward no AnswerForward to AN External Number Forward Follow MEStation Call Pickup Group Call PickupSpeed Dialling Dialling FeaturesProgramming Personal Speed Dial Numbers Last Number Redial ONE Touch Speed DiallingSave Number with Redial Chain DiallingPulse to Tone Changeover Automatic REDIAL/RETRYVoice Dialler Placing a Voice Dial Call Recording a Voice Dial NamePossible Causes for Voice Dialler Failure Making AN Internal Paging and MessagingMaking AN External ALLMeet ME Setting a Message IndicationCall Park Returning Messages Cancelling MessagesProgrammed Messages Programmed MessagesDo not Disturb Convenience FeaturesONE Time DND MuteAnswering the Door Phone Appointment REMINDER/ALARM ClockEXECUTIVE/SECRETARY HOT Line Calling the Door PHONE/ROOM MonitorGroup Listening Account CodesOFF-HOOK Voice Announcing Ohva Locking Your KeysetOhva Reject Ohva BlockGROUP/OUT of Group Customising Your Keyset SET Answer ModeSelect Ring Tone Change Your PasscodeKEY Confirmation Tone Headset OperationRejoining a Ring Preference Interactive Display Keys Display FeaturesDirectory Information Auto Timer Call Duration TimerDial by Directory Display Number DialledAlarm Reminder Messages Manual TimerCall Cost Viewing Message IndicationsPersonal Speed Dial Names Managing KEY Assignments Station NamesViewing the Next Clip Call Selecting Your Clip DisplaySaving the Clip Number Redialling a Saved Clip NumberInquire Clip PARK/HOLD Info LCR with Clear Reviewing Past Clip CallsWith Keyset ADD-ON ModulePersonal Speed Dial Numbers Personal Speed Dial Numbers Memo