Each station group can have an 11 character name Outside and internal calls ringing to a station group will display [CALL NAME]. This allows you to answer calls directed to you differently than calls directed to your station group.
DIAL BY DIRECTORY
Each station or speed dial number can have an associated directory name and can be selected by scrolling alphabetically through the directory name list. This
To dial by directory:
•Press the DIR key (DIRECTORY).
•Select the directory you wish to use: PERS (personal speed dial numbers), SYS (system speed dial numbers) or STN (station names).
•Press the dial key to select the first letter of the name you wish to search for.
•Use the UP and DOWN arrows to scroll through the names.
•Press the DIAL soft key to dial number.
DISPLAY NUMBER DIALLED
Display keysets begin showing digits as they are dialled. They will stay in the display until the call duration timer comes on automatically or the TIMER button is pressed. If the call duration timer is not used, the number dialled is displayed until the call is released, transferred or put on hold.
CALL DURATION TIMER
The system can time outside calls either automatically or manually. Call duration times are displayed in minutes and seconds.
AUTO TIMER
Display keyset users may have the timer automatically start when they answer incoming calls or after a short delay on an outgoing call.
•While
•Dial 11 to turn the auto timer on or 10 to turn it off.
•Press TRSF to store your selection.
35