key selects a character. Pressing the next key moves the cursor to the next position. For example: if your message is “TAKE MEDICATION” , press 8 once to get the letter “T” . Press 2 once to get the letter “A” . Press 5 twice to get “K” . Continue selecting characters from the folllowing table to complete your message.
•Press the TRSF key to store the alarm and reminder message.
•Repeat for each alarm if needed.
COUNT | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
|
|
|
|
|
|
DIAL 0 | ( | ) | . | & | 0 |
DIAL 1 | space | ? | , | ! | 1 |
DIAL 2 | A | B | C | @ | 2 |
DIAL 3 | D | E | F | # | 3 |
DIAL 4 | G | H | I | $ | 4 |
DIAL 5 | J | K | L | % | 5 |
DIAL 6 | M | N | O | ^ | 6 |
DIAL 7 | P | Q | R | S | 7 |
DIAL 8 | T | U | V | ✱ | 8 |
DIAL 9 | W | X | Y | Z | 9 |
DIAL * | : | = | [ | ] | ✱ |
|
|
|
|
|
|
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $,
NOTE: When the character you want appears on the same dial pad key as the previous character, press UP to move the cursor one space to the right.
To cancel an individual alarm and reminder message:
•Press TRSF and then dial 112.
•Dial alarm number 1, 2 or 3.
•Press the HOLD key.
•Press the TRSF key to storey.
PERSONAL SPEED DIAL NAMES
Each personal speed dial number can have a ten character name assigned to it. This name is used to select the speed dial bin when you are dialling by directory. To program speed dial names:
•While on hook, press TRSF followed by 106.
•Dial the speed dial bin number
•Write your name using the procedure described in Alarm
37