Samsung 6B manual Customising Your Keyset, Select Ring Tone, Change Your Passcode, SET Answer Mode

Page 39

CUSTOMISING YOUR KEYSET

SELECT RING TONE

Each keyset user can select any one of eight ring frequencies:

While on-hook, press TRSF followed by 111.

Dial 1-8or press the UP and DOWN keys to hear each tone.

When you hear the tone that you prefer, press TRSF to save it.

CHANGE YOUR PASSCODE

At installation, your station passcode is 1234. You can change your station passcode whenever you desire.

While on-hook, press TRSF followed by 101.

Dial your old passcode.

Dial a new passcode (must be four characters). You can use 0-9, and #.

Dial your new passcode to verify. If successful, you will hear two beeps. Four beeps indicate an incorrect code. (enter the code again.)

Press TRSF to store new passcode.

SET ANSWER MODE

You can receive internal calls in one of three modes (see Answering Intercom Calls under Intercom Calls for descriptions):

While on-hook, press TRSF followed by 103.

Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.

Press TRSF to store your selection.

AUTOMATIC HOLD

While on a outside call, pressing a line key, route key or a flashing CALL button will automatically put your call on hold and connect you to the next call. This feature can be turned on or off at your keyset.

While on hook, press TRSF followed by 110.

Dial 01 to turn Automatic Hold on or 00 to turn it off.

Press TRSF to store your selection.

31

Image 39
Contents DCS System Access Codes LCD 24B STD 24B Publication Information Table of Contents Dialling Features Intercom CallsCall Processing Paging and Messaging Convenience FeaturesCustomising Your Keyset Display FeaturesThings YOU should Know User OrientationCall Indications System Tones Volume ControlsSpeakerphone HOT KeypadPage Labelling Programmable Keys LCD 24B or STD24B Keyset LayoutLCD 12B or STD12B Keyset Layout LCD 24Bi Keyset Layout 6B Enhancedkeyset Layout ADD-ON Moduleaom Layout Outside Calls Making AN Outside CallAnswering AN Outside Call Busy Line Queuing with CALL-BACK Universal Answer DeviceRecall Dial Tone Sending a FlashIntercom Calls Calling Your System Operator Busy Station CAMP-ONHold Recall Call ProcessingSystem Hold Exclusive HoldRetrieving Calls Held AT Another Station Transferring CallsTransfer with CAMP-ON Conference Calls Call WaitingForward no Answer Forwarding CallsForward ALL Calls Forward BusyGroup Call Pickup Forward Follow MEForward to AN External Number Station Call PickupDialling Features Speed DiallingProgramming Personal Speed Dial Numbers Chain Dialling ONE Touch Speed DiallingLast Number Redial Save Number with RedialAutomatic REDIAL/RETRY Pulse to Tone ChangeoverVoice Dialler Recording a Voice Dial Name Placing a Voice Dial CallPossible Causes for Voice Dialler Failure ALL Paging and MessagingMaking AN Internal Making AN ExternalSetting a Message Indication Meet MECall Park Returning Messages Cancelling MessagesProgrammed Messages Programmed MessagesMute Convenience FeaturesDo not Disturb ONE Time DNDAnswering the Door Phone Appointment REMINDER/ALARM ClockAccount Codes Calling the Door PHONE/ROOM MonitorEXECUTIVE/SECRETARY HOT Line Group ListeningOFF-HOOK Voice Announcing Ohva Locking Your KeysetOhva Block Ohva RejectGROUP/OUT of Group Change Your Passcode SET Answer ModeCustomising Your Keyset Select Ring ToneHeadset Operation KEY Confirmation ToneRejoining a Ring Preference Display Features Interactive Display KeysDirectory Information Display Number Dialled Call Duration TimerAuto Timer Dial by DirectoryViewing Message Indications Manual TimerAlarm Reminder Messages Call CostPersonal Speed Dial Names Managing KEY Assignments Station NamesRedialling a Saved Clip Number Selecting Your Clip DisplayViewing the Next Clip Call Saving the Clip NumberInquire Clip PARK/HOLD Info LCR with Clear Reviewing Past Clip CallsWith Keyset ADD-ON ModulePersonal Speed Dial Numbers Personal Speed Dial Numbers Memo