Samsung LCD 12B, LCD 24BI, STD 12B, STD 24B Headset Operation, KEY Confirmation Tone, Rejoining a

Page 40

HEADSET OPERATION

Keyset users can switch between headset mode and handset mode. When using headset mode, press the ANS/RLS key to answer and release calls.

•While on-hook, press TRSF followed by 110.

•Dial 21 to use the headset or 20 to use the handset.

•Press TRSF to store your selection.

NOTES: 1. When you are in headset mode, your speakerphone is disabled.

2.When you place your keyset in headset mode, the ANS/RLS key will light steady to indicate headset mode.

HOT KEYPAD

Hot Keypad allows the user to activate features without the need to lift the handset or press SPEAKER first

To activate this feature.

•While on-hook, press TRSF followed by 110.

•Dial 31 to turn the Hot Keypad on or 30 to turn it off.

•Press TRSF to store your selection.

KEY CONFIRMATION TONE

A short beep (confirmation tone) each time you press a button on the dial pad. This tone can be turned on or off.

•While on-hook, press TRSF followed by 110.

•Dial 40 to turn tones off or 41 to turn tones on.

•Press TRSF to store your selection.

REJOINING A PAGE

Allows keyset users to hear the remaining portion of an ongoing internal page after completing a call.

To enable this feature:

•While on-hook, press TRSF followed by 110.

•Dial 51 to turn this feature on or 50 to turn it off.

•Press TRSF to store your selection.

32

Image 40

Contents DCS System Access Codes LCD 24B STD 24B Publication Information Table of Contents Intercom Calls Dialling FeaturesCall Processing Convenience Features Paging and MessagingDisplay Features Customising Your KeysetUser Orientation Things YOU should KnowCall Indications Volume Controls SpeakerphoneHOT Keypad System TonesPage LCD 24B or STD24B Keyset Layout Labelling Programmable KeysLCD 12B or STD12B Keyset Layout LCD 24Bi Keyset Layout 6B Enhancedkeyset Layout ADD-ON Moduleaom Layout Making AN Outside Call Outside CallsAnswering AN Outside Call Universal Answer Device Recall Dial ToneSending a Flash Busy Line Queuing with CALL-BACKIntercom Calls Busy Station CAMP-ON Calling Your System OperatorCall Processing System HoldExclusive Hold Hold RecallTransferring Calls Retrieving Calls Held AT Another StationTransfer with CAMP-ON Call Waiting Conference CallsForwarding Calls Forward ALL CallsForward Busy Forward no AnswerForward Follow ME Forward to AN External NumberStation Call Pickup Group Call PickupSpeed Dialling Dialling FeaturesProgramming Personal Speed Dial Numbers ONE Touch Speed Dialling Last Number RedialSave Number with Redial Chain DiallingPulse to Tone Changeover Automatic REDIAL/RETRYVoice Dialler Placing a Voice Dial Call Recording a Voice Dial NamePossible Causes for Voice Dialler Failure Paging and Messaging Making AN InternalMaking AN External ALLMeet ME Setting a Message IndicationCall Park Cancelling Messages Returning MessagesProgrammed Messages Programmed MessagesConvenience Features Do not DisturbONE Time DND MuteAppointment REMINDER/ALARM Clock Answering the Door PhoneCalling the Door PHONE/ROOM Monitor EXECUTIVE/SECRETARY HOT LineGroup Listening Account CodesLocking Your Keyset OFF-HOOK Voice Announcing OhvaOhva Reject Ohva BlockGROUP/OUT of Group SET Answer Mode Customising Your KeysetSelect Ring Tone Change Your PasscodeKEY Confirmation Tone Headset OperationRejoining a Ring Preference Interactive Display Keys Display FeaturesDirectory Information Call Duration Timer Auto TimerDial by Directory Display Number DialledManual Timer Alarm Reminder MessagesCall Cost Viewing Message IndicationsPersonal Speed Dial Names Station Names Managing KEY AssignmentsSelecting Your Clip Display Viewing the Next Clip CallSaving the Clip Number Redialling a Saved Clip NumberInquire Clip PARK/HOLD Info Reviewing Past Clip Calls LCR with ClearADD-ON Module With KeysetPersonal Speed Dial Numbers Personal Speed Dial Numbers Memo