VTech 900I Handset does not Ring When YOU Receive a Call, Common Cure for Electronic Equipment

Page 21

THE HANDSET DOES NOT RING WHEN YOU RECEIVE A CALL.

Makesureyou havethehandsetringer activated.

Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack. Make sure the power cord is plugged in.

You may betoo farfrom the base unit. You may have too many extension phonesonyourtelephonelinetoallow all of them to ring. Try unplugging some of the other phones.

YOUR CALLER FADES IN AND OUT. You may be nearly out of range. Move closer, or relocate the base.

YOU HEAR OTHER CALLS WHILE USING YOUR PHONE.

Replace the handset in the base cradle, wait a few moments and try again.

Disconnect your base unit from the telephonejack, and plug in a regular telephone. If you still hear other calls, the problemis probably in your wiring or local service. Call your local telephone company.

YOU HEAR NOISE IN THE HANDSET, AND NONE OF THE KEYS OR BUTTONS WORK.

Make sure the power cord is plugged in.

Your base unit and handset may not be operating on the same channel or security code. Place the handset in the cradleforafew momentsto reload the security code and reset the channel.

COMMON CURE FOR ELECTRONIC EQUIPMENT

Electronics,likepeople,cansometimes get confused. If the unit does not seem to be responding normally, then try putting the handset in the cradle to re- initializethe unit. If itstill does notseem to respondafter doing this a few times, do the following (in the order listed):

1.Disconnectthe power to the base.

2.Disconnect the handset battery.

3.Wait a few minutes.

4.Connect power to the base.

5.Connect the handset battery.

6.Put the handset in the base to reinitialize.

WHAT DOES OUR WARRANTY COVER?

Any defectin materialorworkmanship.

FOR HOW LONG AFTER THE ORIGINAL PURCHASE?

One Year.

WHAT WILL VTECH DO?

At our option, repair or replace your unit.

HOW DO I SEND MY UNIT, IN OR OUT OF WARRANTY?

*I n the US, call VTECH Communicationscustomerservicefor Return Authorization at:

1-800-624-5688

IF YOU PURCHASED YOUR TELEPHONE IN CANADA

Please call: 1-800-267-7377

Properly pack your unit. Include any cables & accessories which were originally provided with the product. We recommend using the original carton and packing materials.

Include in the package a copy of the sales receipt or other evidence of date of original purchase (if the unit was purchased within the last twelve months).

Print you name and address, along with a description of the defect, and include this in the package.

Include payment for any service or repair not covered by warranty, as determined by VTECH Communica- tions or VTECH Electronics Canada Ltd.

In the US, ship the unit via UPS Insured, or equivalent to:

VTECH COMMUNICATIONS

8770 SW Nimbus Avenue

Beaverton, Oregon 97008

Ship to: VTECH ELECTRONICS 200-7671 Alderbridge Way Richmond, BC V6X 1Z9

VTECH ASSUMES NO

RESPONSIBILITY FOR UNITS

RETURNED

WITHOUT PRIOR RETURN

AUTHORIZATION.

WHAT DOES OUR WARRANTY NOT COVER?

Batteries

Damagefrom misuse, neglect,or acts of nature (lightning, floods, power surges, etc.)

*Products which may have been modified or incorporated into other products

Productspurchasedoutsidethe USA

Products serviced by the owner or a service facility not expressly authorized by VTECH Communica- tions

Products purchased more than 12 months from current date

Page 20 Page 22
Image 21
Page 20 Page 22
Contents UEal Checking the Ringer Changing ChannelsMain Function Keys ProgrammiBracket Use a damp cloth for cleaning Outlet before cleaning. Do not useProduct may fall, causing serious Only from the type of power sourceIIT is Impossible to OVER-I Charge the Batteries Setting Up Your VTech Pulse Charge the Handset Batteries Before USECase of Difficulty Connect telephone line cord to base unit and telephone jack Set Dial Mode switch to Pulse orSetting the Ring Type Volume ControlsSetting the Security Code Setting the MailboxesTemporary,Tone Changing ChannelsProgramming the Ringer Type Turning Off The RingerMEM PHONE, MEMClocwtime Stamp Display LCD DisplayBase Keypad Functions Message CounterSetup VolumeMemo MemoryCurrent mode of operation and return To change ring type settingRecording, or exit the set-up mode Type programming mode Advance to security CodePress Setup to exit timelday To change security code Press and hold Setup until it beepsStorage. On initial power-up, only Generic mailbox is enabledLeaving a Message Example for AnnouncementSpeak into the base microphone to record the memo Listening t o MessagesTo activate remote operation from a different telephone line Followed by $Listeningto Messages Voice PromptsChangingthe Announcement Recording a MemoThis key has no function if ITADis not in Playback mode Depending on the current announcement selectionLeaving Memos Record Memo Select Announcement# OFF Taking Care of Your TelephoneOUT of Range When Phone is OFF OUT of Range When Phone is onNoise or Interference OUT of Range IndicationYOU Hear Other Calls While Using Your Phone Handset does not Ring When YOU Receive a CallWhat does OUR Warranty COVER? HOW do I Send MY UNIT, in or OUT of WARRANTY?Vtech Communications Reorient or relocate the receiving antennaVtech Electronics Increase the separation between the equipment and receiverPower Requirements WeightFrequency Control Transmit FrequencyVtech Cordless Telephone Wall Mounting Template
Top Page Image Contents