•When the handset is in conference mode, press SEL/INT on the handset to page the base unit, when the base rings, press FIND
HANDSET/INT on the base to answer the page, press FIND
HANDSET/INT again to exit the conversation..
•When the base is in conference mode, press FIND
HANDSET/INT on the base to page the handset unit, when the handset rings, press SEL/INT on the handset to answer the page, press SEL/INT again to exit the conversation..
12
Telephone operation
Three way conference call
At the handset: |
|
| |
• While on an active call (on either line..) | L1/2 HOLD | CONF | |
• Press HOLD.. Make a call on the other line.. | |||
|
| ||
• Press HOLD to hold the other call, the screen will display: | 12/28 2:34AM | ||
• Press SEL/INT to enter conference mode.. |
|
| |
At the base: |
|
| |
• While on an active call (on either line..) |
|
| |
• Press HOLD.. Make a call on the other line.. | L1 L2 HOLD |
| |
• Press HOLD to hold the other call, the screen will display: | 12/28 2:34AM | ||
• Press CONF.. The two lines are conferenced together.. | |||
|
| ||
Four way conference call |
|
| |
At the handset: |
|
| |
• While on an active call (on either line..) |
|
| |
• Press HOLD.. Make a call on the other line.. | L1/2 HOLD | CONF | |
• Press HOLD to hold the other call, the screen will display: | |||
• Press SEL/INT on handset to enter conference mode.. | 12/28 2:34AM | ||
• Press CONF on base to enter conference mode.. |
|
|
At the base:
• While on an active call (on either line..)
• Press HOLD.. Make a call on the other line..
• Press HOLD to hold the other call, the screen will display:
• Press CONF on base to enter conference mode..
• Press either LINE 1 or LINE 2 on handset to enter conference mode..
If you want to end the call with only one person, press the LINE button of the person you want to connect (if will hang up with the other line)..
www.vtechphones.com