VTech CS6519-2, CS6519-14 Appendix, Expand your telephone system, Add and register a handset

Appendix

Expand your telephone system

Your telephone base can support up to five handsets. Each handset must be registered to the telephone base before use. The handsets provided within your product package are already registered as HANDSET 1 and so forth. You can add new handsets (CS6509/CS6509-14/CS6509-15/CS6509-16, purchased separately) to your telephone base. Additional handsets are assigned numbers in the sequential order they are registered (up to HANDSET 5).

Add and register a handset

When first purchased, each expansion handset displays To register HS and

See manual alternately. You may need to charge the handset before registering to the telephone base. For more details on battery charging, see the table on page 4.

To register a handset:

1. Place the new/non-registered handset in the telephone base.

Do not place the handset in the charger.

2.After about 10 seconds, the handset displays Registering.... . When the registration process completes, the handset displays Registered and you hear a confirmation tone. The registration process takes about 90 seconds to complete.

If the registration fails, the handset displays Failed and then To register HS and See manual alternately, remove the handset from the telephone base and place it back in. Try the registration process again.

•You cannot register a handset if any other system handset is in use.

•Only one handset can register to the telephone base at a time.

40