VTech CS6519-15, CS6519-2, CS6519-14, CS6519-17 To activate the CEC battery charging testing mode

Page 61

Appendix

California Energy Commission battery charging testing instructions

This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled.

To activate the CEC battery charging testing mode:

1.Unplug the telephone base power adapter from the power outlet. Make sure all handsets are plugged with charged batteries.

2.While you press and hold FIND HANDSET, plug the telephone base power adapter back to the power outlet.

3.After about 20 seconds, when the IN USE light starts flashing, release FIND HANDSET and then press it again within 2 seconds.

When the phone successfully enters the CEC battery charging testing mode, the IN USE light turns off and all handsets display To register HS and See manual alternately.

When the phone fails to enter this mode, repeat Step 1 through Step 3 above.

Note: The telephone base will be powered up as normal if you fail to press FIND HANDSET within 2 seconds in Step 3.

To deactivate the CEC battery charging testing mode:

1.Unplug the telephone base adapter from the power outlet, then plug it back in. Then the telephone base is powered up as normal.

2.Register your handsets back to the telephone base. See page 40 for handset registration instructions.

Appendix

57

Image 61

Contents User’s manual Congratulations Table of contents Index Getting started Parts checklistTelephone base and charger installation Battery installation Displays Put in charger Battery chargingTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationUSE light Telephone base layoutHandset layout VolumeQUIET# Using the menu Telephone settingsRinger volume To enter the handset menuTo set the duration and turn on the quiet mode Quiet modeTo turn off the quiet mode Ringer toneSet date and time Press Select to choose LCD language LCD languageTo set your voicemail number Voicemail numberClear voicemail To manually turn off these indicatorsHome area code Key toneDial mode Telephone operation Mute VolumeCall waiting Temporary ringer silencingRedial Temporary tone dialingTo review and dial a redial entry To delete a redial entryTo access a number in the caller ID log To access a number in the directoryTo access a number on the redial list Check voicemailTransfer a call Web addressCalling HS X and then Transferred To start paging Find handsetTo end paging Join a call in progress Multiple handset useTo share an outside call Answer an incoming call during an intercom call IntercomINT needs 2 HS Calling HSCall transfer using intercom About the directory DirectoryPress Select to choose Add contact Add a directory entryDirectory Alphabetical search Review and dial from the directoryTo start an alphabetical search Delete a directory entry Edit a directory entryAssign a speed dial entry Speed dialDial a speed dial number Reassign a speed dial entryDelete a speed dial entry Clear SD #X?About caller ID Caller IDInformation about caller ID with call waiting Caller ID log Missed call indicatorReview and dial from the caller ID log Memory matchView dialing options Displays Edit name Caller ID log screen messages Delete the caller ID log entriesTo delete an entry To delete all entriesExpand your telephone system AppendixAdd and register a handset To register a handsetTo deregister all handsets Replace a handsetScreen messages No BatteryAppendix Handset lights Handset and telephone base indicatorsTelephone base lights Handset iconsPage Low battery shows on the handset screen TroubleshootingTelephone does not ring when there is an incoming call My cordless handset isn’t performing normallyAppendix Hear other calls when using the telephone Experience poor sound quality when using the speakerphoneMy caller ID features are not working properly Hear noise on the cordless handset and the keys do not workOut of range or no pwr at base shows on the handset screen Telephone does not receive caller ID while on a callCannot retrieve voicemail messages Common cure for electronic equipment Important safety instructions Battery Maintenance ECO modeOperating range Rbrc seal FCC Part FCC, Acta and IC regulationsIndustry Canada To activate the CEC battery charging testing mode Mesures de sécurité importantes For C-UL compliance onlyConservez CES Instructions Propos des téléphones sans fil What does this limited warranty cover? Limited warrantyHow do you get warranty service? Technical specifications Index Index