![](/images/new-backgrounds/1140391/14039165x1.webp)
Base Menu Soft Functions
Base Settings
To access base settings, with the base in the idle (off) mode, press MENU, scroll down to BASE SETTINGS, then press SELECT. You can now access the following
setting | options: |
|
|
|
CLOCK SETTING | WEEKDAY SETTING | RINGER VOLUME | ||
RINGER MELODY | KEYPAD TONE | CONTRAST | ||
DIAL TYPE | FACTORY | SETTINGS | DELETE HANDSETS | |
PRODUCT ID |
|
|
| |
Press CLEAR at any time to back out of the base settings mode. | ||||
Clock | Setting |
|
|
|
If you | subscribe to | caller ID, the clock | will automatically be set when the first call | |
is received. If you | don’t have caller ID | or wish to set the clock manually: |
•Press MENU. Use or
to scroll to BASE SETTINGS, then press SELECT.
•CLOCK SETTING will be highlighted, press SELECT.
•Press the CHANGE softkey to change the first digit of the hour, press NEXT. (Follow this procedure to change the remaining digits of the time and select AM or PM.)
•When finished, press SET, you’ll hear a confirmation tone.
Weekday Setting
•Press MENU.
•Use and
softkeys to scroll to BASE SETTINGS, press SELECT.
•Use and
softkeys to scroll to WEEKDAY SETTING, press SELECT.
•Use and
softkeys to scroll to select the day, then press SET, you’ll hear a
confirmation beep.
Ringer Volume
To adjust the base unit ringer volume:
•Press MENU. Scroll down to BASE SETTINGS,
then press SELECT. Use or
softkeys to
RINGER VOLUME, press SELECT. You will see a
graph on the base display indicating the current
volume setting.
• Press the | softkey to lower the ringer volume. | SET |
|
At the lowest setting (graph is completely clear),
the base will not ring when a call comes in.
•Press the softkey to raise the volume. At the loudest setting, the graph is completely shaded in.
•Press SET to confirm your setting.
NOTE: When the phone is ringing, press QUIET softkey or CLEAR key to temporarily mute the ringer.
Ringer Melody |
| |
There are six base ringer melody choices. To change |
| |
the melody: |
| |
• Press MENU. Scroll down to BASE SETTINGS, | RINGER MELODY 4 | |
press SELECT. Scroll down to RINGER MELODY. | ||
|
•Press SELECT. Use either scroll key to sample
the melodies. | SET |
•Press SET to confirm your selection.
Advanced Operations
33