Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank account information or access codes) from the directory, call log or redial list.
To access a number in the directory while on a call:
1.Press MENU/SELECT twice to select >DIRECTORY.
2.Scroll to the desired entry by pressing 
or 
.
3.Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
1.Press MENU/SELECT and then press 
or 
to highlight >CALL LOG.
2.Press MENU/SELECT to select.
3.Scroll to the desired entry by pressing 
or 
.
4.Press MENU/SELECT to dial the displayed number.
To access the last number on the redial list while on a call:
Press REDIAL/PAUSE to dial. Press REDIAL/PAUSE again within two seconds to cancel the chain dialing.
• You cannot edit a directory entry while on a call. For more details about the directory, see page 16.
•You cannot copy a call log entry into the directory while on a call. For more details about call log, see page 22.
•If you press REDIAL/PAUSE while on a call, you can only view the most recent call, and you cannot erase the entry. For more details about the redial memory, see page 25.
•Press and hold OFF/CLEAR to exit redial, directory or call log when you are on a call.
13