VTech LS6226-2, LS6225-4, LS6225-3, LS6225-5, LS6225-2 user manual Battery

Page 39

Appendix

Battery

It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation	Operating time

While in handset use (talking*)	Up to eight hours

While in speakerphone mode (talking*)	Up to five hours

While not in use (standby**)	Up to six days

*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps.

•A battery is properly installed and the screen is blank.

•LOW BATTERY or PLACE IN CHARGER shows on the handset screen.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

•Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

•Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.

•Do not open or mutilate the battery(ies). Released electrolyte is corrosive and might cause burns or injury to the eyes or skin. The electrolyte might be toxic if swallowed.

•Exercise care in handling batteries in order not to create a short circuit with conductive materials.

•Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and metallic contacts.

•To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

35

Image 39

Contents User’s manual Congratulations Table of contents Index AppendixGetting started Parts checklistTelephone base and charger installation Place in Charger Battery installation and chargingCharge light Handset layoutRepeat Telephone base layoutKey tone Telephone settingsRinger volume handset Ringer toneSet date/time LCD languageHome area code Clear voicemailRemote code Answering system settingsAnswering system set up Number of ringsDelete your announcement AnnouncementPlay your announcement Record your own announcementTelephone operation Find handset MuteRinger mute Call waitingTo access a number in the directory while on a call To access a number in the call log while on a callChain dialing Multiple handset use IntercomAnswer an incoming call during an intercom call Share an outside call Directory Enter Name Store a directory entryCharacter chart MENU/SELECT twice Search the directoryAlphabetical search Dial a directory entryShows Edit Name Edit a directory entryDelete from the directory Shows Edit NumberAbout caller ID Missed calls indicator Call logAlready in it, not Available AT this Time appears Review the call log Make a call log entry ready to dialDial a call log entry To delete all entries Save a call log entry to the directoryDelete from the call log To delete one entryDelete from redial Call log display screen messagesRedial list Dial a redial entryAnswering system operation Answering system and voicemailMessage capacity Call intercept Telephone base ringer volumeTurn the answering system on or off Call screeningTo play messages with a handset New message indicationMessage playback To play messages with the telephone baseTo delete all old messages with a handset Delete all old messagesRecord and play memos To delete all old messages with the telephone baseWindow display Description Message window displaysCommand Remote accessHandset display screen messages AppendixThere is no telephone line connected Handset icons Handset and telephone base indicators Handset lightsBattery indicator Telephone base lightsBattery Add and register a handset optional Expand your telephone systemReplace a handset Troubleshooting Low Battery shows on screenMy telephone does not work at all Telephone does not ring when there is an incoming call Charge light is offThere is no dial tone My handset beeps and is not performing normally Cannot dial outHear other calls when using the telephone My caller ID features are not working properlyHear noise on the cordless handset and the keys do not work CONNECTING... shows in the handset screen Caller ID entries do not match the numbers I need to dialOutgoing announcement is not clear Messages on the answering system are incomplete Answering system does not respond to remote commandsMessages on the answering system are very difficult to hear Answering system does not record messagesImportant safety instructions Operating range MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specifications Index Index 91-002282-040-100