Motorola RDU2080d Side Buttons, Push-to-Talk PTT Button, Side Button 1 SB1, Side Button 2 SB2

Page 16

RADIO OVERVIEW

•	A Programmable Button

Default set to generate the current programmed call tone.

•B Programmable Button

Default set to preset Channel 1

•C Programmable Button

Default set to preset Channel 2

Note: A short press of either preset button (B or C) tunes the radio to the preset channel and the radio will play a good chirp. You can assign different functions to these buttons via the CPS. For example: Backlight Time Out, Reverse Burst, Power Select, Scan/ Nuisance Channel Delete, Monitor and Call Tones. To learn more about how to program these buttons refer to “Entering Programming Mode” on page 42 and “CPS (Computer Programming Software)” on page 53

Side Buttons

Push-to-Talk (PTT) Button

Press and hold down this button to talk, release it to listen.

Side Button 1 (SB1)

The Side Button 1 is a general button that can be configured by the CPS. The default setting of the SB1 button is ‘Monitor’.

Side Button 2 (SB2)

The Side Button 2 is a general button that can be configured by the CPS. The SB2 button default setting is ‘Scan/Nuisance Channel Delete’.

The Lithium-Ion (Li-Ion) Battery

RDX Series™ provides different types of batteries. For more information, see “Battery Features” on page 16.

English 14

Image 16

Contents Page Page Contents Programming Features Getting StartedTroubleshooting Use and Care Frequency and Code Charts Programmable Buttons Chart Icons Chart 100Safety Product Safety and RF Exposure ComplianceBatteries Chargers Safety Information Operational Safety Guidelines Package Contents IntroductionUSA Canada On your TTY Text TelephoneFCC Licensing Information Interference InformationFCC Licensing Information Radio Overview Parts of the RadioOn/Off/Volume Knob Accessory ConnectorLED Indicator Model LabelLithium-Ion Li-Ion Battery Side ButtonsPush-to-Talk PTT Button Side Button 1 SB1Model Frequency Band AntennaBattery Features About the Li-Ion BatteryBattery Recycling and Disposal BatteryInstalling the Lithium-Ion Li-Ion Battery Removing the Lithium-Ion Li-Ion BatteryRemoving Alkaline Batteries Attaching and Removing Antenna Installing Spring Action Belt Clip Power Supply, Adaptor and Drop-in Tray ChargerBattery Life Information Li-Ion Battery Life with Battery Save feature onAlkaline Battery Life Alkaline Battery LifeBattery Meter RDX Series Battery MeterCharging the Battery Charging with the Drop-in Tray Single Unit Charger SUCCharging a Standalone Battery Charging a Standard BatteryCharging a High Capacity or Ultra High Capacity Battery Drop-in Tray Charger LED Indicators Standard Charger LED IndicatorRapid Charger LED Indicator Estimated Charging Time Charging Battery Type SolutionEstimated Charging Time MUC LED Indicator Adjusting Volume Getting StartedTurning Radio ON/OFF Reading the DisplayTalking and Monitoring Selecting a ChannelReceiving a Call Signal Strength Indicator and Channel Busy Indicators Talk RangeGetting Started Radio LED Indicators Radio Status LED IndicationWith Compatible VOX Accessories HANDS-FREE USE/VOXBattery Save Hands Free without Accessories iVOXReset to Factory Defaults End of Transmission Tone Roger Beep Tone Keypad BeepsKeypad Lock/Unlock Menu OptionsSetting VOX / iVOX sensitivity IVOBattery Type Menu LithiumProgramming Features Entering Programming ModeProgramming RX Reception Frequencies Programming RX Reception Codes CTCSS/DPL Programming RX Reception BandwidthProgramming Scramble L Programming Maximum Number of Channels Programming Call TonesImic Programming Microphone Gain LevelOther Programming Features Programming Microphone Accessory Gain LevelScan YES Programming Scan ListProgramming Buttons Editing Channel Alias NameOr exit without saving changes by turning OFF Nuisance Channel Delete CPS Computer Programming Software Time-Out Timer Power SelectBattery Type Setting Bandwidth SelectScramble Call TonesReverse Burst Cloning Radios Programming Features Source Radio Radio to be cloned Operating InstructionsWhat to do if cloning fails Repeater Capabilities Programming SoftwareProgramming Repeater Capability Programming Features Following screen Troubleshooting Symptom Try ThisRange. Check for clear line of sight to improve transmission Troubleshooting VOX feature might be set to OFF USE and Care RDX VHF Frequencies Frequency and Code ChartsFrequency # Frequency # Bandwidth RDX VHF 8CH Radios Default Frequencies RDV2080d Channel Frequency # Code # BandwidthXTN VHF Default Frequencies Channel Frequency # Code BandwidthRDX UHF Frequencies Frequency # Frequency Bandwidth MHz Frequency # Frequency RDU2080d UHF Default Frequencies Chart RDX UHF 8 CH Radios Default Frequencies RDU2080dRDU4160d UHF Default Frequencies Chart RDX UHF 16 CH Radios Default Frequencies RDU4160dFrequency and Code Ctcss and PL/DPL Codes Ctcss CodesDPL 365 503 English What Does this Warranty Cover? Motorola Limited Warranty for the United States and CanadaProducts and Accessories Warranty ExclusionsHOW to Obtain Warranty Service or Other INFORMATION? SoftwareWHO is COVERED? Software Copyright NoticePatent Notice Export LAW AssurancesAccessories Audio AccessoriesBattery AntennasCarry Accessories Power Supplies AC PIN AdaptorsSoftware Applications CablesPower Supplies RDX Series Features Summary Radio Panel Lock CTCSS/DPL Accessory Radio Power up Text Timer VOX Programmable Buttons Chart Icons Chart 101 Page 6880309T01-A