Motorola RDU2080d, RDV2080d Bandwidth Select, Time-Out Timer, Power Select, Battery Type Setting

PROGRAMMING FEATURES

Bandwidth Select

Default setting for Bandwidth Select depends on the specific frequency and channel. For details refer to ‘Frequencies and Codes Charts’ Section.Some frequencies have selectable channel spacing, which must match other radios for optimum audio quality.

Time-Out Timer

When PTT button is pressed, transmissions can be terminated by setting up a 'time-out’ timer.

Power Select

Power Select allows you to select the radio between high and low transmission power per

frequency in each channel. The power levels for RDX™ series 2W toggle between 1W and 2W or 2W and 4W/5W depending on the radio model .

Note: Some frequencies may have FCC transmit power restrictions that don't allow them to be set at a higher power level. For details see the Frequencies and Code Chart Section.

Battery Type Setting

The RDX™ series radio can be powered by either Alkaline, Lithium-Ion cells or battery pack. The battery pack can be detected at power-up and the corresponding battery level will be shown on the radio's display.

English 54