PROGRAMMING FEATURES
PROGRAMMING
FEATURES
ENTERING PROGRAMMING MODE
To enter ‘Programming Mode’, press and hold both the PTT button and the SB1 button simultaneously for three seconds, while turning ON the radio. A unique tone will sound, indicating that the radio has entered ’Programming Mode’ and the radio LED will signal a green heartbeat. Once the radio enters the ‘Programming Mode’, which defaults to ‘Idle’ Programming Mode, the LED will blink a green heartbeat.
Whenever you enter ’Programming Mode’ the PROG icon will be displayed and the current channel aliasing name will be blinking to indicate that you can select the channel you want to program.
You can scroll up/down to select the different channels by pressing the 
/ 
buttons.
In ‘Programming Mode’ your radio is capable of setting values for each channel by moving between the different programming modes available: Frequencies, CTCSS/DPL codes (Interference Eliminator Code), Scramble, Bandwidth, Maximum Channels, Call Tone, Microphone Gain and Scan.
•To move along the different Programming Selection Modes without saving changes, short press the PTT button or MENU button.
•To save changes long press the PTT button. The radio will return to ‘Idle’ Programming Mode.
English 42