Motorola RDU2080d Programming Software, Repeater Capabilities, Programming Repeater Capability

	Cloning Radios using the CPS (Computer
	Programming Software)
	To clone RDX™ radios using the CPS
	software, you will need to have available the
	CPS, a Drop-in Charger Tray and the CPS
	Programming Cable. Information on how to
	clone using the CPS is available either in
PROGRAMMING FEATURES	• the CPS Help File --> Content and Index -->
	accessories refer to the Accessories Section.
	Cloning Radios or
	• in the CPS Programming Cable Accessory
	Leaflet.
	To order the CPS programming cable, please
	refer to P/N RKN4155. For details about

Repeater Capabilities

Programming Repeater Capability

You can only program Repeater Frequencies if your radio has been previously configured via

the CPS. The repeater icon		will appear
solid, and the MENU options	for	programming

TX frequencies, TX CTCSS/DPL codes and TX

English 60

Bandwidth will be available. If the repeater feature is mapped (using CPS) to one of the radio buttons, then the repeater icon will blink. This indicates that you can use the repeater ‘button’ to toggle ON/OFF repeater. If repeater is not enabled in the radio this icon will not be displayed.

Once you have selected the channel you want to set up for repeater operation, you can move between the Programming options by short pressing the PTT or MENU button to program the frequency, code and bandwidth for the repeater channel.