Motorola RDV2080d, RDU2080d manual Timer

	Programmable Via		Programmable via
Features	RADIO PANEL			CPS		Default Value	Programming Tips
	Display	Non-	Display		Non-
		Display			Display
Scan	Yes	Yes	N/A		N/A	SB2 Button	Short press SB2 to enable/disable scan.
							Use CPS for editing Scan List (adding/removing
Scan List	Yes	No	Yes		Yes	ON - All	channels to be scanned). For display models only:
						Channels	you can add/delete channels in the scan list using
							front panel by going into Programming Mode(1).
Scan, Auto							Feature available only for Non Display Models. For
	No	Yes	No		Yes	OFF	front programming using front panel radio enter
Scan
							Programming Mode(1)
						OFF	Display models only: you can program scramble
Scramble (4)	Yes	No	Yes		Yes		using front panel by going into Programming
						(level 0)
							Mode(1).
							Use CPS to program to program how long the PTT
Time-Out							can be pressed before the transmission is
	No	No	Yes		Yes	60 seconds	automatically terminated. Values are 60, 120 and
Timer
							180 seconds. (Pressing again PTT will start the
							transmission again).

97