radio will sound the call tone selected (except for setting ‘0’). Once you have selected the tone you want to program, long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving
Note: The values available for Call Tones are dependent upon the values programmed via the CPS. When the call tone setting is ‘0’ it means it is disabled.
PROGRAMMING MICROPHONE GAIN LEVEL
To configure the microphone gain level, enter ’Programming Mode’ and scroll through the programming options by short pressing the PTT button. When you reach the ‘Microphone
Gain Level Programming Mode’ the display will read as follows:
IMIC |
The current microphone gain level setting will blink. You can select the desired microphone gain level by pressing the 
/ 
buttons (1=low gain,2= Medium gain or 3= high gain).
Once you have selected the gain level you want to program, long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.
Note: The values available for microphone gain level are dependent upon maximum levels the radio supports.
PROGRAMMING FEATURES
47English