Cisco Systems AS5800 manual Port, Cisco MC3810, Default, No port is configured

Page 27

port

port

To associate a dial peer with a specific voice port, use the port dial peer configuration command. To cancel this association, use the no form of this command.

Cisco 2600/3600 Series Router

port slot/subunit/port

no port

Cisco MC3810

port slot/port

no port

Cisco AS5300 Access Server

port controller number:D

no port

Cisco AS5800 Access Server

port {shelf/slot/port:D} {shelf/slot/parent:port:D}

no port

Syntax Description

controller number:D

Specifies the T1 or E1 controller; :D indicates the D channel associated

 

with ISDN PRI. Valid entries for the controller number variable is 0 to 3.

shelf/slot/port:D

Specifies the T1 or E1 controller on the T1 card; :D indicates the

 

D-channel associated with ISDN PRI. Valid entries for the shelf variable

 

is 0 to 9999. Valid entries for the slot variable is 0 to 11. Valid entries for

 

the port variable is 0 to 11.

shelf/slot/parent:port:D Specifies the T1 controller on the T3 card; :D indicates the D-channel

 

associated with ISDN PRI. Valid entries for the shelf variable is 0 to

 

9999. Valid entries for the slot variable is 0 to 11. Valid entries for the

 

port variable is 1 to 28. The value for the parent variable is always 0.

port

Specifies the voice port number. Valid entries are 0 or 1.

slot

Specifies the slot number where the voice interface card is installed.

 

Valid entries are 0 or 1.

subunit

Specifies the subunit on the voice interface card in the router where the

 

voice port is located. Valid entries are 0 or 1.

Default

No port is configured.

Voice over IP for the Cisco AS5800 27

Image 27
Contents Voice over IP for the Cisco AS5800 Feature OverviewFeature Overview BenefitsTwo-Stage-Dial Toll Bypass Benefits Two-Stage Dial Toll Bypass Pstn Voice-Traffic and Fax-Traffic Off loadRelated Documents Related Features and TechnologiesUniversally Accessible Voice-Mail and Fax-Mail Services RestrictionsMIBs Supported PlatformsSupported Standards, MIBs, and RFCs StandardsPrerequisites PrerequisitesConfiguration Tasks Configuring IP Networks for Real-Time Voice TrafficConfiguration Tasks Configuring Custom Queuing and IP RTP Reserve Configuring Voice PortsStep Command Purpose Configuring Voice PortsConfiguration Tasks Step Command Purpose Fine-Tuning Isdn Voice PortsVerifying Voice Port Configuration Troubleshooting TipsSecondsinfinity Inbound versus Outbound Dial Peers Configuring Dial PeersPots peer. The number value of the dial-peer voice Configuring Pots PeersPots command is a tag that uniquely identifies Outbound Dialing on Pots PeersIncoming and Outgoing Pots Call Legs Direct Inward Dial for Pots PeersDistinguishing Voice and Modem Calls on the Cisco AS5800 Using the elements, the algorithm is as followsVerifying Dial Peer Configuration Configuring VoIP PeersRouterconfig-if#h323-gateway voip h323-id Configuring the Cisco AS5800 as an H.323 GatewayConfiguring the Cisco AS5800 as an H.323 Gateway Routerconfig-if#h323-gateway voip interfaceRouter config# call application voice name Configuring the Cisco AS5800 for Interactive Voice ResponseVerifying Gateway Interface Configuration Configuring IVRConfiguration Example Verifying IVR ConfigurationConfiguration Example Configuring the Cisco 3640 as a Gatekeeper Configuring the Cisco 2600 as a GatewayConfiguring the Cisco AS5800 as a Gateway Command Reference New CommandsCommand Reference Codec Port Show csm Show voice port Voice-port Modified CommandsSyntax Description DefaultsCommand Modes CodecExamples Command HistoryRelated Commands Usage GuidelinesDtmf-relay CommandDescription Cisco MC3810 DefaultNo port is configured PortExample Command ModeShow csm Router# show csm voice 2/4/4/0 Field Description Explains the fields contained in both of these examplesSpecifies the T1 or E1 controller Show csm voice Field DescriptionsCommand Reference Show csm voice Field Descriptions Show csm Tdmdspstream Related Commands Syntax Description For the Cisco 2600/3600 series Show voice portShow voice port For the Cisco AS5300 Access ServerFor the Cisco AS5800 Universal Access Server For the Cisco MC3810Router# show voice port 1/0/0 Router# show voice port 1/2 Explains the fields in the sample output Show voice port Field DescriptionsSummary Show voice port Command Reference Show voice port Field Descriptions Show voice port Field Descriptions for the Cisco AS58005800# show voice port 1/0/0D Isdn 1/0/0D Show call active voice Show vrm activecalls ReleaseModification5800# show vrm activecalls Show vrm vdevice Field Descriptions Show vrm activecallsCommand Reference Show vrm vdevice Field Descriptions Show vrm vdevices Show vrm vdevices5800# show vrm vdevices 6 Show vrm vdevices Summary of voice devices for all voice cards 5800# show vrm vdevices summaryShow vrm vdevice summary Field Descriptions CCCAPCODECG711U DSP# Show vrm activecalls Test vrm busyout Test vrm busyoutRouter# test vrm busyout 4 all Router# test vrm busyout 4 1 channel Router# test vrm busyout 4 1Router# test vrm reset 4 Test vrm resetFollowing example resets DSP 4 on the VFC installed in slot Test vrm resetRouter# test vrm unbusyout 4 all Test vrm unbusyoutTest vrm unbusyout Router# test vrm unbusyout 4 1Router# test vrm unbusyout 4 1 channel Voice-port Voice-port Global configurationDial-peer voice Debug Commands New Debug CommandsDebug Commands Debug vrm control There are no arguments or keywords used in this commandFormat of the Send messages is as follows Format for the Receive messages is as followsDebug vrm control Debug vrm control Field Descriptions Describes the fields in previous exampleDebug vrm error Debug vrm errorVtspfail codec value not supported Expains the field contained in the previous example This error message notifies the VRM of a DSP alarmPossible state values are as follows = Reset Debug vrm error Field DescriptionsDebug vrm control Debug vrm inout Debug vrm inoutGlossary GlossaryGlossary Glossary
Related manuals
Manual 168 pages 22.1 Kb Manual 6 pages 32.91 Kb Manual 16 pages 55 Kb

AS5800 specifications

Cisco Systems has long been a leader in the networking and telecommunications field, and its AS5800 series of routers exemplify this tradition. The AS5800, along with the AS5850, AS5350, AS5400, and AS5300, provides robust solutions for service providers and enterprise-level networking applications. Each of these models has distinct features and characteristics that cater to the evolving demands of internet traffic and data processing.

The Cisco AS5800 is designed for high-capacity routing and optimized for broadband services. It supports a wide range of services, including voice, data, and video applications, making it a versatile option for service providers looking to deliver integrated solutions. It is equipped with advanced quality of service (QoS) features that ensure bandwidth is allocated effectively, holding strong even under heavy traffic conditions.

In comparison, the AS5850 offers superior processing capabilities and is typically utilized in larger-scale implementations. This model supports high-density interfaces, allowing numerous connections without compromising performance. Its architecture includes enhanced MPLS (Multiprotocol Label Switching) support, enabling more efficient traffic management and better utilization of network resources.

The AS5350 is known for its scalability and energy efficiency, ideal for voice-over-IP (VoIP) and media gateway applications. It supports various telephony features, such as protocol interworking and transcoding, making it a preferred choice for organizations focusing on digital voice technologies. The AS5300, while slightly older, continues to be a valuable asset for less demanding networks, offering reliable performance with VoIP capabilities and basic data applications.

The AS5400 bridges the gap between high-performance routing and operational efficiency. It incorporates Cisco's proprietary technologies to ensure seamless connectivity and robust failover systems. This model is highly regarded for its security features, protecting network integrity and providing peace of mind for businesses relying on sensitive data transfer.

Overall, Cisco’s AS5800 series showcases a progressive evolution of routing capabilities with enhanced features tailored for resilience, scalability, and performance. These routers not only address the technical needs of modern networks but also strategically position organizations for future growth in an increasingly digital world. Each model, with its unique attributes, continues to support the varied demands of global communication infrastructures.