Cisco Systems AS5800 manual Command Reference, 5800# show vrm vdevices 6

Page 48

Command Reference

Examples

The following is sample output from the show vrm vdevice command specifying dial shelf slot number and DSP number. In this particular example, the call is active so the statistics displayed are for this active call. If no calls are currently active on the device, the statistics would be for the previous (or last active) call.

5800# show vrm vdevices 6 1

slot = 6 virtual voice dev (tag) = 1 channel id = 1 capabilities list map = 9FFF

last/current codec loaded/used = None TDM timeslot = 0

Resource (vdev_common) status = 401 means :active others tot ingress data = 101

tot ingress control = 1194 tot ingress data drops = 0 tot ingress control drops = 0 tot egress data = 39722

tot egress control = 1209 tot egress data drops = 0 tot egress control drops = 0

slot = 6 virtual voice dev (tag) = 1 channel id = 2 capabilities list map = 9FFF

last/current codec loaded/used = None TDM timeslot = 1

Resource (vdev_common) status = 401 means :active others tot ingress data = 21

tot ingress control = 1167 tot ingress data drops = 0 tot ingress control drops = 0 tot egress data = 19476

tot egress control = 1163 tot egress data drops = 0 tot egress control drops = 0

Table 5 explains the fields in the sample output.

Table 5

show vrm vdevice Field Descriptions

 

 

 

Field

 

Description

 

 

 

slot

 

Slot where voice card is installed.

 

 

virtual voice dev (tag)

Identification number of the virtual voice device.

 

 

 

channel id

 

Identification number of the channel associated with this virtual voice device.

 

 

 

48Cisco IOS Release 12.0(7)T

Image 48
Contents Feature Overview Voice over IP for the Cisco AS5800Feature Overview BenefitsTwo-Stage-Dial Toll Bypass Pstn Voice-Traffic and Fax-Traffic Off load Benefits Two-Stage Dial Toll BypassRelated Features and Technologies Universally Accessible Voice-Mail and Fax-Mail ServicesRestrictions Related DocumentsSupported Platforms Supported Standards, MIBs, and RFCsStandards MIBsPrerequisites PrerequisitesConfiguration Tasks Configuring IP Networks for Real-Time Voice TrafficConfiguration Tasks Configuring Voice Ports Configuring Custom Queuing and IP RTP ReserveConfiguring Voice Ports Step Command PurposeFine-Tuning Isdn Voice Ports Configuration Tasks Step Command PurposeVerifying Voice Port Configuration Troubleshooting TipsSecondsinfinity Configuring Dial Peers Inbound versus Outbound Dial PeersConfiguring Pots Peers Pots command is a tag that uniquely identifiesOutbound Dialing on Pots Peers Pots peer. The number value of the dial-peer voiceDirect Inward Dial for Pots Peers Incoming and Outgoing Pots Call LegsUsing the elements, the algorithm is as follows Distinguishing Voice and Modem Calls on the Cisco AS5800Configuring VoIP Peers Verifying Dial Peer ConfigurationConfiguring the Cisco AS5800 as an H.323 Gateway Configuring the Cisco AS5800 as an H.323 GatewayRouterconfig-if#h323-gateway voip interface Routerconfig-if#h323-gateway voip h323-idConfiguring the Cisco AS5800 for Interactive Voice Response Verifying Gateway Interface ConfigurationConfiguring IVR Router config# call application voice nameConfiguration Example Verifying IVR ConfigurationConfiguration Example Configuring the Cisco 3640 as a Gatekeeper Configuring the Cisco 2600 as a GatewayConfiguring the Cisco AS5800 as a Gateway Command Reference New CommandsCommand Reference Modified Commands Codec Port Show csm Show voice port Voice-portDefaults Command ModesCodec Syntax DescriptionCommand History Related CommandsUsage Guidelines ExamplesDtmf-relay CommandDescription Default No port is configuredPort Cisco MC3810Command Mode ExampleShow csm Router# show csm voice 2/4/4/0 Explains the fields contained in both of these examples Specifies the T1 or E1 controllerShow csm voice Field Descriptions Field DescriptionCommand Reference Show csm voice Field Descriptions Show csm Tdmdspstream Related Commands Show voice port Syntax Description For the Cisco 2600/3600 seriesFor the Cisco AS5300 Access Server For the Cisco AS5800 Universal Access ServerFor the Cisco MC3810 Show voice portRouter# show voice port 1/0/0 Router# show voice port 1/2 Explains the fields in the sample output Show voice port Field DescriptionsSummary Show voice port Command Reference Show voice port Field Descriptions Show voice port Field Descriptions for the Cisco AS58005800# show voice port 1/0/0D Isdn 1/0/0D Show call active voice Show vrm activecalls ReleaseModification5800# show vrm activecalls Show vrm activecalls Show vrm vdevice Field DescriptionsCommand Reference Show vrm vdevice Field Descriptions Show vrm vdevices Show vrm vdevices5800# show vrm vdevices 6 Show vrm vdevices 5800# show vrm vdevices summary Summary of voice devices for all voice cardsShow vrm vdevice summary Field Descriptions CCCAPCODECG711U DSP# Show vrm activecalls Test vrm busyout Test vrm busyoutRouter# test vrm busyout 4 all Router# test vrm busyout 4 1 Router# test vrm busyout 4 1 channelTest vrm reset Following example resets DSP 4 on the VFC installed in slotTest vrm reset Router# test vrm reset 4Test vrm unbusyout Router# test vrm unbusyout 4 allTest vrm unbusyout Router# test vrm unbusyout 4 1Router# test vrm unbusyout 4 1 channel Voice-port Global configuration Voice-portDial-peer voice Debug Commands New Debug CommandsDebug Commands There are no arguments or keywords used in this command Debug vrm controlFormat of the Send messages is as follows Format for the Receive messages is as followsDebug vrm control Describes the fields in previous example Debug vrm control Field DescriptionsDebug vrm error Debug vrm errorVtspfail codec value not supported This error message notifies the VRM of a DSP alarm Possible state values are as follows = ResetDebug vrm error Field Descriptions Expains the field contained in the previous exampleDebug vrm control Debug vrm inout Debug vrm inoutGlossary GlossaryGlossary Glossary
Related manuals
Manual 6 pages 32.91 Kb Manual 16 pages 55 Kb

AS5800 specifications

Cisco Systems has long been a leader in the networking and telecommunications field, and its AS5800 series of routers exemplify this tradition. The AS5800, along with the AS5850, AS5350, AS5400, and AS5300, provides robust solutions for service providers and enterprise-level networking applications. Each of these models has distinct features and characteristics that cater to the evolving demands of internet traffic and data processing.

The Cisco AS5800 is designed for high-capacity routing and optimized for broadband services. It supports a wide range of services, including voice, data, and video applications, making it a versatile option for service providers looking to deliver integrated solutions. It is equipped with advanced quality of service (QoS) features that ensure bandwidth is allocated effectively, holding strong even under heavy traffic conditions.

In comparison, the AS5850 offers superior processing capabilities and is typically utilized in larger-scale implementations. This model supports high-density interfaces, allowing numerous connections without compromising performance. Its architecture includes enhanced MPLS (Multiprotocol Label Switching) support, enabling more efficient traffic management and better utilization of network resources.

The AS5350 is known for its scalability and energy efficiency, ideal for voice-over-IP (VoIP) and media gateway applications. It supports various telephony features, such as protocol interworking and transcoding, making it a preferred choice for organizations focusing on digital voice technologies. The AS5300, while slightly older, continues to be a valuable asset for less demanding networks, offering reliable performance with VoIP capabilities and basic data applications.

The AS5400 bridges the gap between high-performance routing and operational efficiency. It incorporates Cisco's proprietary technologies to ensure seamless connectivity and robust failover systems. This model is highly regarded for its security features, protecting network integrity and providing peace of mind for businesses relying on sensitive data transfer.

Overall, Cisco’s AS5800 series showcases a progressive evolution of routing capabilities with enhanced features tailored for resilience, scalability, and performance. These routers not only address the technical needs of modern networks but also strategically position organizations for future growth in an increasingly digital world. Each model, with its unique attributes, continues to support the varied demands of global communication infrastructures.