Cisco Systems AS5800 manual Show voice port

		show voice port
Table 2	show voice port Field Descriptions (continued)
Field		Description
Currently Processing		Type of call currently being processed: none, voice, or fax.
Delay Duration Timing		Maximum delay signal duration for delay dial signaling.
Delay Start Timing		Timing of generation of delayed start signal from detection of incoming
		seizure.
Description		Description of the voice port.
Dial Type		Out-dialing type of the voice port.
Digit Duration Timing		DTMF digit duration in milliseconds.
E&M Type		Type of E&M interface.
Echo Cancel Coverage		Echo cancel coverage for this port.
Echo Cancellation		Whether or not echo cancellation is enabled for this port.
Hook Flash Duration Timing		Maximum length of hook flash signal.
Hook Status		Hook status of the FXO/FXS interface.
Impedance		Configured terminating impedance for the E&M interface.
In Gain		Amount of gain inserted at the receiver side of the interface.
In Seizure		Incoming seizure state of the E&M interface.
Initial Time Out		Amount of time the system waits for an initial input digit from the caller.
InterDigit Duration Timing		DTMF interdigit duration in milliseconds.
InterDigit Pulse Duration Timing		Pulse dialing interdigit timing in milliseconds.
Interdigit Time Out		Amount of time the system waits for a subsequent input digit from the caller.
Maintenance Mode		Maintenance mode of the voice port.
Maximum Playout Delay		The amount of time before the Cisco MC3810 DSP starts to discard voice
		packets from the DSP buffer.
Music On Hold Threshold		Configured music-on-hold threshold value for this interface.
Noise Regeneration		Whether or not background noise should be played to fill silent gaps if VAD is
		activated.
Nominal Playout Delay		The amount of time the Cisco MC3810 DSP waits before starting to play out
		the voice packets from the DSP buffer.
Non-Linear Processing		Whether or not non-linear processing is enabled for this port.
Number of signaling protocol errors		Number of signaling protocol errors.
Operations State		Operation state of the port.
Operation Type		Operation of the E&M signal: two-wire or four-wire.
Out Attenuation		Amount of attenuation inserted at the transmit side of the interface.
Out Seizure		Outgoing seizure state of the E&M interface.
Port		Port number for this interface associated with the voice interface card.
Pulse Rate Timing		Pulse dialing rate in pulses per second (pps).
Region Tone		Configured regional tone for this interface.
Ring Active Status		Ring active indication.
Ring Cadence		Configured ring cadence for this interface.
Ring Frequency		Configured ring frequency for this interface.

Voice over IP for the Cisco AS5800 41