Cisco Systems AS5800 manual Show vrm vdevices

Page 47

show vrm vdevices

show vrm vdevices

To display detailed information for a specific DSP or a brief summary display for all VFCs, use the show vrm vdevices privileged EXEC command.

show vrm vdevices {{vfc-slot-number voice-device-number} summary}

Syntax Description

vfc-slot-number

Slot number of the VFC. Valid number is 0 to 11.

voice-device-number

DSP number. Valid number is 1 to 96.

summary

List synopsis of voice feature card DSP mappings, capabilities, and

 

resource states.

Defaults

No default behavior or values.

Command Modes

Privileged EXEC

Command History

ReleaseModification

12.0(7)T

This command was introduced.

 

 

Usage Guidelines

Use the show vrm vdevice to display detailed information for a specific DSP or a brief summary display for all VFCs. The display provides information on the number of channels, channels per DSP, bitmap of DSPMs, version numbers, and so on. This information is useful in monitoring the current state of your VFCs.

The display for a specific DSP provides information on the codec that each channel is using, if active, or last used and if the channel is not currently transmitting cells. It also displays the state of the resource. In most cases, if there is an active call on that channel, the resource should be marked active. If the resource is marked as reset and/or bad, this may be an indication of a response loss for the VFC on a reset request. If this condition persists, you might experience a problem with the communication link between the router shelf and the VFC.

Voice over IP for the Cisco AS5800 47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Voice over IP for the Cisco AS5800 Feature OverviewTwo-Stage-Dial Toll Bypass Feature OverviewBenefits Benefits Two-Stage Dial Toll Bypass Pstn Voice-Traffic and Fax-Traffic Off loadRelated Documents Related Features and TechnologiesUniversally Accessible Voice-Mail and Fax-Mail Services RestrictionsMIBs Supported PlatformsSupported Standards, MIBs, and RFCs StandardsPrerequisites PrerequisitesConfiguration Tasks Configuration TasksConfiguring IP Networks for Real-Time Voice Traffic Configuring Custom Queuing and IP RTP Reserve Configuring Voice PortsStep Command Purpose Configuring Voice PortsConfiguration Tasks Step Command Purpose Fine-Tuning Isdn Voice PortsSecondsinfinity Verifying Voice Port ConfigurationTroubleshooting Tips Inbound versus Outbound Dial Peers Configuring Dial PeersPots peer. The number value of the dial-peer voice Configuring Pots PeersPots command is a tag that uniquely identifies Outbound Dialing on Pots PeersIncoming and Outgoing Pots Call Legs Direct Inward Dial for Pots PeersDistinguishing Voice and Modem Calls on the Cisco AS5800 Using the elements, the algorithm is as followsVerifying Dial Peer Configuration Configuring VoIP PeersRouterconfig-if#h323-gateway voip h323-id Configuring the Cisco AS5800 as an H.323 GatewayConfiguring the Cisco AS5800 as an H.323 Gateway Routerconfig-if#h323-gateway voip interfaceRouter config# call application voice name Configuring the Cisco AS5800 for Interactive Voice ResponseVerifying Gateway Interface Configuration Configuring IVRConfiguration Example Configuration ExampleVerifying IVR Configuration Configuring the Cisco AS5800 as a Gateway Configuring the Cisco 3640 as a GatekeeperConfiguring the Cisco 2600 as a Gateway Command Reference Command ReferenceNew Commands Codec Port Show csm Show voice port Voice-port Modified CommandsSyntax Description DefaultsCommand Modes CodecExamples Command HistoryRelated Commands Usage GuidelinesDtmf-relay CommandDescription Cisco MC3810 DefaultNo port is configured PortExample Command ModeShow csm Router# show csm voice 2/4/4/0 Field Description Explains the fields contained in both of these examplesSpecifies the T1 or E1 controller Show csm voice Field DescriptionsCommand Reference Show csm voice Field Descriptions Show csm Tdmdspstream Related Commands Syntax Description For the Cisco 2600/3600 series Show voice portShow voice port For the Cisco AS5300 Access ServerFor the Cisco AS5800 Universal Access Server For the Cisco MC3810Router# show voice port 1/0/0 Router# show voice port 1/2 Summary Explains the fields in the sample outputShow voice port Field Descriptions Show voice port 5800# show voice port 1/0/0D Isdn 1/0/0D Command Reference Show voice port Field DescriptionsShow voice port Field Descriptions for the Cisco AS5800 Show call active voice 5800# show vrm activecalls Show vrm activecallsReleaseModification Show vrm vdevice Field Descriptions Show vrm activecallsCommand Reference Show vrm vdevice Field Descriptions Show vrm vdevices Show vrm vdevices5800# show vrm vdevices 6 Show vrm vdevices Summary of voice devices for all voice cards 5800# show vrm vdevices summaryShow vrm vdevice summary Field Descriptions CCCAPCODECG711U DSP# Show vrm activecalls Router# test vrm busyout 4 all Test vrm busyoutTest vrm busyout Router# test vrm busyout 4 1 channel Router# test vrm busyout 4 1Router# test vrm reset 4 Test vrm resetFollowing example resets DSP 4 on the VFC installed in slot Test vrm resetRouter# test vrm unbusyout 4 all Test vrm unbusyoutRouter# test vrm unbusyout 4 1 channel Test vrm unbusyoutRouter# test vrm unbusyout 4 1 Voice-port Voice-port Global configurationDial-peer voice Debug Commands Debug CommandsNew Debug Commands Debug vrm control There are no arguments or keywords used in this commandDebug vrm control Format of the Send messages is as followsFormat for the Receive messages is as follows Debug vrm control Field Descriptions Describes the fields in previous exampleDebug vrm error Debug vrm errorVtspfail codec value not supported Expains the field contained in the previous example This error message notifies the VRM of a DSP alarmPossible state values are as follows = Reset Debug vrm error Field DescriptionsDebug vrm control Debug vrm inout Debug vrm inoutGlossary GlossaryGlossary Glossary
Related manuals
Manual 168 pages 22.1 Kb Manual 6 pages 32.91 Kb Manual 16 pages 55 Kb

AS5800 specifications

Cisco Systems has long been a leader in the networking and telecommunications field, and its AS5800 series of routers exemplify this tradition. The AS5800, along with the AS5850, AS5350, AS5400, and AS5300, provides robust solutions for service providers and enterprise-level networking applications. Each of these models has distinct features and characteristics that cater to the evolving demands of internet traffic and data processing.

The Cisco AS5800 is designed for high-capacity routing and optimized for broadband services. It supports a wide range of services, including voice, data, and video applications, making it a versatile option for service providers looking to deliver integrated solutions. It is equipped with advanced quality of service (QoS) features that ensure bandwidth is allocated effectively, holding strong even under heavy traffic conditions.

In comparison, the AS5850 offers superior processing capabilities and is typically utilized in larger-scale implementations. This model supports high-density interfaces, allowing numerous connections without compromising performance. Its architecture includes enhanced MPLS (Multiprotocol Label Switching) support, enabling more efficient traffic management and better utilization of network resources.

The AS5350 is known for its scalability and energy efficiency, ideal for voice-over-IP (VoIP) and media gateway applications. It supports various telephony features, such as protocol interworking and transcoding, making it a preferred choice for organizations focusing on digital voice technologies. The AS5300, while slightly older, continues to be a valuable asset for less demanding networks, offering reliable performance with VoIP capabilities and basic data applications.

The AS5400 bridges the gap between high-performance routing and operational efficiency. It incorporates Cisco's proprietary technologies to ensure seamless connectivity and robust failover systems. This model is highly regarded for its security features, protecting network integrity and providing peace of mind for businesses relying on sensitive data transfer.

Overall, Cisco’s AS5800 series showcases a progressive evolution of routing capabilities with enhanced features tailored for resilience, scalability, and performance. These routers not only address the technical needs of modern networks but also strategically position organizations for future growth in an increasingly digital world. Each model, with its unique attributes, continues to support the varied demands of global communication infrastructures.
Top Page Image Contents