Cisco Systems 7975G manual If you want to Then

When using the intercom feature, be aware of the following:

•From an intercom line, you can only dial other intercom lines.

•You can use only one intercom line at a time.

•When your active call is being monitored or recorded, you can receive or place intercom calls.

•You cannot place an intercom call on hold.

Note If you log into the same phone on a daily basis using your Cisco Extension Mobility profile, ensure that your system administrator assigns the phone button template that contains intercom information to this profile and assign the phone as the default intercom device for the intercom line.

If you want to...	Then...
Place an intercom call to a	Press	(intercom target line) and, after you hear the
preconfigured intercom target	intercom-alert tone, begin speaking.
Place an intercom call to any	Press	(an intercom line). Enter the intercom target number or
intercom number	press a speed-dial number for your target. After you hear the
	intercom-alert tone, begin speaking.
Receive an intercom call	When you hear the intercom-alert tone, handle the call in one of these
	ways:

•Listen to the message in one-way audio.

•Speak to the caller by pressing (the active intercom line).

•Press EndCall with the intercom call in focus.

38 OL-22332-01