Establish Telephone Line Connections | VeriFone Omni 37xx specs

WARNING

TERMINAL SETUP

Establish Telephone Line Connections

•Two RJ45-type modular jacks (serial ports) are for attaching optional peripheral devices.

• RS232 port, icon at right, connects a VeriFone CR 600 check reader or other peripheral device.

•Bar Code and PIN Pad port, icons at right, connects a PIN pad, smart card reader, or bar code wand.

•Power connection port that uses a round port with a lock notch for securely connecting the terminal to a power source. It is identified by the electrical power icon at right.

Do not connect the terminal to the power supply until all the peripherals are attached.

Establish

Telephone Line

Connections

Connect the telephone cord (VeriFone Part Number 00124-17) to the communication port on the terminal then route it directly to a telephone wall jack (see Figure 4). This is a direct connection, and the line is dedicated to the terminal.

Install Paper Roll

Figure 4 Direct Telephone Connection

A fast, quiet thermal printer is built in to the Omni 37xx. There are no additional printer cables to connect because the printer receives power directly from the terminal.

Before you can process transactions that require a receipt or record, you must install a roll of thermal-sensitive paper in the printer. This procedure is described in To Install a Paper Roll section.

OMNI 37XX INSTALLATION GUIDE