TERMINAL SETUP
Connect Terminal Power Pack
Figure 14 Omni 37xx Power Pack Connection
•To lock the connector into the power port, align the plastic lock tab so it points up. Insert the connector, then twist it to the left.
•To unlock the connector, twist it to the right.
2Insert the power cable into the power pack.
3Plug the power pack cable into a wall outlet or surge protector.
WARNING Do not plug the power pack into an outdoor outlet or operate the terminal outdoors. Also, disconnecting power during a transaction may cause transaction data files that are not yet stored in terminal memory to be lost.
NOTE
To protect against possible damage caused by lightning strikes and electrical surges, consider installing a power surge protector.
When the terminal has power, the LCD screen lights and the green LED indicator flashes on and off if the printer has no paper, or stays lit if paper is loaded.
If an application is loaded in the terminal, it starts after the initial VeriFone copyright screen and displays a unique copyright screen. If no application is loaded in the terminal, DOWNLOAD NEEDED appears on screen after the initial VeriFone copyright screen.
OMNI 37XX INSTALLATION GUIDE | 21 |