Getting started
Remote dial pad registration and de-registration
PLEASE WAIT...
DIAL PAD
REGISTERED
1
DIAL PAD
1
DIAL PAD
1
DIAL PAD
2
(until the red MUTE light on the headset base turns on) and then release the button. The remote dial pad shows PLEASE WAIT..., then DIAL PAD REGISTERED. It takes about 30 seconds to complete the registration.
4.The MUTE light turns off and you see the DIAL PAD screen (shown on the left) indicating successful registration.
Register the remote dial pad to the headset base (with two headsets)
•The dial pad can only be paired with one headset, even if there are two headsets in your system. The dial pad pairs with the most recently registered headset. The display indicates the paired dial pad by showing either 
1or 
2.
NOTES:
1.You cannot register a remote dial pad if a system headset is in use.
2.If the registration is not successful, the display shows NOT REGISTERED. Reset the remote dial pad by lifting it out of the charger and then placing it back in the charger. Now try the registration process again.
3.If you have one registered headset, the remote dial pad automatically connects to the headset after registering on the headset base.
4.If you have two headsets, and you want the other headset to work with the remote dial pad, you have to
5.Registration time depends on environmental conditions and varies.