Troubleshooting | AT&T TL7650, TL7651, TL7601 instruction

Troubleshooting

the Battery installation & charging section (pages 4-5) of this user’s manual.

•Your remote dial pad might be malfunctioning. Please refer to the Limited warranty section (pages 35-38) of this user’s manual for further instruction.

My remote dial pad does not react when I receive a call.

•Make sure that the remote dial pad is registered to the headset base.

•The remote dial pad may be too far from the headset base. Move it closer to the headset base within the operating range.

•The layout of your home or office might be limiting the operating range. Try moving the headset base to another location, preferably on an upper floor.

•Charge the battery in the remote dial pad for at least six hours. For optimum daily performance, return the remote dial pad to its charger when not in use.

•Other electronic products can cause interference to your cordless phone. Try installing your phone as far away from these types of electronic devices as possible: television sets, VCRs, or other cordless telephones.

•Disconnect, and then re-install the battery. Place the remote dial pad in the charger. Wait for the remote dial pad to re-establish its connection with the headset base. Allow up to one minute for this to take place.