Getting started
Charger installation
1.Make sure the small end of the power adapter is plugged into the jack on the back of the charger, and then make sure that the cord is routed behind the tab as shown.
2.Plug the power adapter into a power outlet not controlled by a wall switch.
IMPORTANT INFORMATION
1.Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at
www.telephones.att.com, or call 1 (800)
2.The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-