Remote dial pad operation
PHONE 0:00:30
1 
MUTE/FLASH button
NOTES:
1. Pressing
CALL/FLASH to access services from your local telephone service provider will not affect the elapsed time, which will continue to record the total talk time.
2. You cannot press
OFF/CLEAR to exit call waiting without ending the call.
Options while on calls
Call waiting
If you subscribe to call waiting service with your local telephone service provider, you will hear a beep in the headset if there is an incoming call while you are already on a call. Press 
CALL/FLASH on the remote dial pad or press and hold the MUTE/FLASH key on the headset to put your current call on hold and take the new call. Press 
CALL/FLASH on the remote dial pad or press and hold the MUTE/FLASH key on the headset at any time to switch back and forth between calls.
To end call waiting call, press ON/OFF on the headset.
When you connect the headset with a corded phone using LIFTER MODE, press the flash but- ton on the corded phone to switch back and forth between calls.
Last number redial
•While on a call, pressing 
or 
on the remote dial pad only displays the number last dialed.
•The displayed number is dialed if you press 
CALL/FLASH.
Press 
OFF/CLEAR on the dial pad or press ON/OFF on the headset to exit the call.
14