Installation of large lifter pad optional

Getting started

Handset lifter installation

12.Place the telephone handset on the lifter arm.

13.Test to make sure the hook is cor- rectly operated by pressing the

ON/OFF button on the headset.

It may take some adjustments and testing to find the right position for the lifter. For the lifter to work properly, the switch hook must release completely when you press the ON/OFF button on the headset. The switch hook must also be pressed all the way when you press the ON/OFF button on the headset.

Adhesive tape

Installation of large lifter pad (optional)

If the small lifter pad cannot hold the corded handset steady, you can attach a large lifter pad (provided) to enlarge the contact area.

1.Hold the large lifter pad in front of the small lifter pad, as shown.

2.Insert the large lifter pad into the two front gaps of the small lifter pad.

Installation of anti-slip pad (optional)

The anti-slip pad (provided) helps prevent your corded handset from slipping from the lifter.

1.Position the anti-slip pad on the lifter arm in the center front of the lifter pad.

2.Peel the paper from the adhesive tape.

3.Carefully return the anti-slip pad to its previ- ous position and rest your corded handset on the lifter.