Getting started
Quick reference guide - Handset lifter
ALERT ON/OFF |
| SENSOR ADJ knob |
Turns the ring detector on or off. When the ringer detector is turned off, the cordless headset does not receive a call alert tone.
Lifter arm
Holds the corded telephone handset.
Adjusts the sensitivity of the ring detector (page 12).
STATUS light
The light quickly flashes when there is an incoming call that the ring detector senses. The light flashes slowly when the switch hook presser is raised and you are on a call. The light is red when the ring detector is turned off (page 13).
Switch hook presser
When LIFTER MODE is on, pressing the ON/OFF key on the headset raises and lowers the switch hook presser, and holds down the switch hook when the phone is not in use.
RING DETECT jack
Inserts the ring detector into the jack (page 11).
Lifter control cable
This cable is hard wired into the lifter and plugs into the LIFTER jack on the headset base.
1