Getting started
Handset lifter installation
5. Pick up the lifter, turn it over, and peel the paper from the adhesive tape.
| 6. Carefully return the lifter to the same |
| position that you noted before and |
Adhesive tape | press down. |
7. Follow the headset base installation steps on pages
ON/OFF
button
Motor
8.Remove the handset from your tele- phone.
9.Press ON/OFF on the headset and listen for the dial tone. Make sure the switch hook presser is in its
10.Adjust the motor back and forth (as shown on the left) to set the switch hook presser just above the switch hook.
11.Press down on the lifter arm until the switch hook presser firmly touches the switch hook on the telephone. Then slide the lifter arm height con- trol down one notch at a time. Stop adjusting when you hear the dial tone from the headset or handset earpiece, or when you see the telephone’s line indicator light.