AT&T TL7000 user manual Troubleshooting

Page 22

Troubleshooting

Troubleshooting

If you have difficulty with your handset lifter, please try the suggestions below. For Customer Service, visit our website at

www.telephones.att.com, or call 1 (800) 222–3111. In Canada dial 1 (866) 288-4268.

The switch hook presser of the lifter doesn’t raise at all.

Make sure LIFTER MODE is selected on the headset base.

Make sure the lifter control cable is securely plugged into the LIFTER jack on the headset base.

Make sure the ring detector cable is firmly plugged into the RING DETECT jack on the lifter.

Make sure all cords and the telephone line cord are securely connected to the proper sockets.

Make sure your corded telephone has power.

Make sure your headsets and remote dial pad are charged and registered to the headset base. (For registration instructions, please refer to the manual provided with your TL7600/TL7610/TL7611/TL7650/ TL7651 or 7601 product, or visit

www.telephones.att.com to download

the manual.

17

Image 22
Contents User’s manual Congratulations Parts checklist Table of contents Troubleshooting Quick reference guide Handset lifter Alert ON/OFFSmall lifter pad Handset lifter installation Lifter installationPress down Installation of large lifter pad optional Installation of anti-slip pad optionalConnect the headset base Rear view of the headset base connectionsHandset lifter installation DSL filter Color label Light blue Headset base installation with lifter see Figure Adjust lifter audio Ring detector installation Install the ring detectorAdjust the sensitivity level Headset incoming alert toneStatus light Handset lifter operation Make a call with the corded handsetButton Handset lifter operation Troubleshooting Troubleshooting Cannot dial out in Lifter Mode Lifter Audio Adjust switch Taking care of your handset lifter MaintenanceCleaning your handset lifter Avoid waterImportant safety information Limited warranty Limited warranty Limited warranty Other limitations Index