Getting started
Handset lifter installation
Headset base installation with lifter (see Figure 4)
1.Plug one end of the telephone line cord (provided with your telephone) into the telephone jack.
2.Plug the other end of the telephone line cord into the wall jack.
3.Make sure the small end of the power adapter is plugged into the green POWER jack on the headset base.
4.Plug the large end of the power adapter into a power outlet not controlled by a wall switch.
5.Plug the lifter control cable into the blue LIFTER jack on the headset base.
6.Unplug the curly handset cord from the telephone.
7.Plug the curly handset cord into the light blue 
CURLY CORD jack on the headset base.
8.Plug one end of the telephone line cord (provided with the lifter) into the base handset jack on the telephone where the curly handset cord was plugged in.
9.Plug the other end of the line cord into the orange BASE 
JACK on the headset base.
10.Continue to adjust the lifter audio on the headset base (see page 10) , and then go to step 8 on page 4 to complete the rest of the lifter installation.