Getting Started
Battery installation & charging
After battery installation, place the cordless handset in the base and allow to charge for at least 16 hours before use. You can keep the battery charged by returning the cordless handset to the base after each use. When the battery is fully depleted, a recharge takes about 16 hours. The talk time on a fully charged battery is about four hours depending on environmental conditions, and the standby time is approximately five days. Actual battery life will depend on usage conditions, and age of battery.
Press down on tab to open the battery door.
BATTERY LOW
8/12 10:06 AM
Low battery indicator. Return cordless handset to base to recharge when this symbol flashes. (When in use the cordless handset will beep when battery
is low).
Plug the battery pack connector securely into the plug inside the cordless handset battery compartment, matching the color- coded label. Then place battery pack into compartment.
Caution: Use only the supplied rechargeable battery or AT&T replacement battery model 3301 (SKU 91076, Part number
Place cordless handset in base to charge for at least 16 hours before first use.
Slide the battery door up to close.
14
7