AT&T E1126 Basic cordless handset operation, Making and answering calls, Last number redial

MUTE CHAN REDIAL

12345678901

MUTE CHAN REDIAL

Redial

Telephone Operation

Basic cordless handset operation

Making and answering calls

To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER, then dial a number. Press OFF or place the cordless handset back in the base to hang up.

To preview numbers before dialing, enter numbers first, then press PHONE or SPEAKER to dial. Press Vat any time to make corrections as you are entering numbers.

The screen displays the elapsed time as you talk (in hours, minutes and seconds).

NOTE: The elapsed time format is in minutes and seconds “MM:SS” until one hour has elapsed, then it will change to hours, minutes and

seconds “H:MM:SS”.

Pressing FLASH to access services from your local telephone service provider will not affect the elapsed time.

Hands-free speakerphone calls

To answer a call, press SPEAKER. To make a call, press SPEAKER, then dial a number. During a call you can press SPEAKER to toggle between hands-free speakerphone and normal cordless handset use. Press OFF to hang up.

Last number redial

Press REDIAL on the cordless handset to display the last number called (up to 32 digits). To dial the number displayed, press PHONE or SPEAKER. Or, after pressing PHONE or SPEAKER, press REDIAL to call the last num- ber dialed.

To delete this number, press REDIAL twice when the phone is not in use. This will clear the redial memory and leave it blank.

Temporary ringer silencing

Press OFF while the phone is ringing to temporarily turn off the ringer. The next phone call will ring normally. You can answer the call or let the caller leave a message.

This will silence the ringer without disconnecting the call. If your answering system is on, the caller will be asked to leave a message.

12