1 DIR
DIRECTORY
2^
ADAM 5551234
3 SELECT
SPEED EDIT ERASE
5551234
^
SPEED EDIT ERASE
5551234
^
SPEED EDIT ERASE
5551234
Press SELECT to choose blinking option
Directory
Changing directory entries
When any entry is displayed, press SELECT to see options. Press Vor ^to highlight the option you want (blink- ing text), then press SELECT again to select it.
To edit an entry
When EDIT is blinking, press SELECT. You can change the name and number (or distinctive ring setting on the cordless handset) by following the steps described on pages
To delete an entry
Press ^until ERASE is blinking, then press SELECT to display a confirmation screen (ERASE NO YES).
To delete the entry, press ^to highlight YES, then press SELECT.
To cancel the procedure and leave the entry intact, press Vto highlight NO, then press SELECT.
To make an entry into a Speed Dial entry
Press ^until SPEED is blinking, press SELECT, then dial a speed dial location
NOTE: If you use a memory location that is already assigned to a differ- ent entry in the directory, that entry will remain in the directory, but will
no longer be a Speed Dial number.
20