AT&T EL51109 user manual Handset operation, Auto off, Speakerphone information, Last number redial

Telephone operation

Handset operation

Auto off

Placing the handset in the telephone base automatically ends a call.

Speakerphone information

During a call, press SPEAKER to switch between hands-free speakerphone and normal handset use. Press OFF/CLEAR to hang up.

Elapsed time

NOTES:
1. If you use the speakerphone during LOW BATTERY mode,	TQFBLFS!1;11;41
the handset is not lit except for the SPEAKER button.

2.The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are using

the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. When the battery is very low, you cannot switch a call from normal handset use to speakerphone mode.

3.After installing the battery into the handset, the screen may show LOW BATTERY. If you use speakerphone at this time, the battery may become depleted. Follow the instructions in the Battery installation & charging section on pages 5-6.

Last number redial

To view the recently dialed numbers:

•To display the most recently called number (up to 30

digits), press REDIAL/PAUSE.		SFEJBM
		999.994.3556
• To view up to five recently called numbers, press
REDIAL/PAUSE. Then press TCID or DIRS, or press
REDIAL/PAUSE repeatedly.
The handset beeps twice at the beginning and at the end of
the list.
Press	OFF/CLEAR to exit.

To redial a number:

•To dial the displayed number, press PHONE/FLASH or SPEAKER.

-OR-

•You can call the most recently called number by pressing

PHONE/FLASH or SPEAKER, then pressing REDIAL/PAUSE.

While reviewing the redial memory, press DELETE to delete the displayed number.

16