Jabra SP100 Status indicators, Enhanced features, Rejecting an incoming call when not on a call

SP100 User Guide_NA.qxd 5/7/04 2:46 pm Page 8

English

13	Enhanced features (for Bluetooth mobile
	phones with hands-free profile)

Bluetooth profiles4 are protocols through which Bluetooth devices communicate with each other. Bluetooth phones support different sets of profiles – most support the headset profile but some support the hands-free profile and others support both. In order for Bluetooth devices to talk to each other they need to support the same Bluetooth profile. JABRA SP100 supports both the headset and hands-free profiles.

Although the JABRA SP100 is compatible with Bluetooth phones with either Bluetooth profile, enhanced features are available for phones that support the hands-free Bluetooth profile. Check your phone’s instruction guide or contact the phone manufacturer to find out if your phone supports the hands-free Bluetooth profile.

*A list of mobile phones with the hands-free profile can be found online at www.jabra.com/fscs

Enhanced features:

•Last number redial (when not on a call)

While the speakerphone is on, press and hold until you hear 2 short beeps, release immediately.

•Rejecting an incoming call (when not on a call)

When your phone rings, press and hold until you hear 2 short beeps, release immediately.

•Call-waiting(swapping between 2 calls)

When your phone notifies you of another incoming call while you’re on a call, press

and hold until you hear 2 short beeps, release immediately.

•Putting a call on hold

While you’re on a call, press and hold until you hear 2 short beeps, release immediately. Repeat to retrieve the call.

14 Status indicators

	What you do		What you hear		What you see
Turning	Slide power switch to the		Ascending		The blue indicator light
speakerphone	on position “l”		(low to high) tones		will flash 4 times
on
Turning	Slide power switch to the
speakerphone	off position “0”
off
Status		What you hear		What you see
Active Mode5 -		When active mode starts		Blue flashes every second
Call in progress		you will hear a quick series
• Up to 12 hours		of 2 tones – low to high
of talk time*		pitch. When you end a call
		you will hear 2 tones - high
		to low pitch
Standby Mode6 -				Blue flashes every 3 seconds
Waiting for call
• Up to 480 hours
of standby time*
Office Standby				Blue flashes twice every 3 seconds
Mode
Active Call Muted				Alternating yellow and blue flashes
Recharging from				Green flashes every second
empty battery state
Recharging from				Green solid light
low battery state
Low Battery		Active Mode: 3 beeps		Red flashes 3 times
		every 3 minutes
		Standby Mode: 3 beeps
		every 30 minutes

*Depending on mobile phone type and usage.

English

8 9