Toshiba TLPX10E Trouble indications, Maintenance, Control panel, Main unit side, Indicator

Trouble indications CONTENTS 82

If there is some problem inside the projector, the indicators light up or blink.

Control panel

(Main unit side)

AUTO AUTO

KEYSTONE SET

VOL/ADJ.

ENTER	EXIT
MENU	INPUT
ON/STANDBY
TEMP LAMP	ON
BUSY	FAN	Indicator

TEMP LAMP	ON	The power does not come on.
BUSY	FAN	→ Malfunction of the unit.
		• Unplug the power cord and call the dealer.
Or	(Lit in red)
TEMP LAMP	ON	The lamp turns off or does not light up.
(Lit in red) (Lit in red)		→ The lamp’s duration life is end, or malfunction of the unit.
BUSY	FAN
		• Lamp’s duration life is over, replace the lamp with a new one.
		86
		• Unplug the power cord and call the dealer.

TEMP LAMP	ON	The power turns off or does not come on.
(Lit in red)		→ The inside is too hot, or the projector has been working in an
BUSY	FAN	area of high temperature.
(Lit in green)		• Place the projector correctly so the intake and exhaust fans’
Or	Or	holes are not covered.

(Lit in red) (Lit in orange) (Lit in green)

•Turn the projector off, and leave it for a while, and turn it on again.

•Clean the air filter. 83

				* The icon	appears before the power turned off.
TEMP LAMP ON				The power turns off or does not come on.
		(Lit in red)
				→ Trouble with the cooling fan.
BUSY			FAN
				• Unplug the power cord and call the dealer.
(Lit or flashing	Or
		(Lit or flashing
				* The icon	appears before the power turned off.
in red)		in orange)
TEMP LAMP ON				The power turns off or does not come on.
(Flashing in orange)				→ The lamp cover is not properly attached.
BUSY			FAN
			(Lit in red)	• Unplug the power cord and reattach the lamp cover. 87
				* The icon	appears before the power turned off.

Note

If abnormality occurs while operating, unplug the power cord.

Maintenance