Toshiba TLPX10E owner manual Connect the power cord, Take off the lens cover, Light Orange

Floor-mounted projector placement (continued)

3	Connect the power cord.
	• Insert one end in the AC IN socket on the projector.
	• Insert the other end in a wall outlet.
		AUTO
		KEYSTONE	AUTO
			SET
		VOL/ADJ.
		ENTER
		EXIT
		MENU
		INPUT
	TEMP	ON/STANDBY
	BUSY	LAMP
		ON
		FAN

TEMP LAMP ON

Light (Orange)

BUSY FAN

The ON indicator lights in orange and the

Power cordprojector turns to standby mode. (Supplied)

CONTENTS

19

Installation and connection

4 Take off the lens cover.

Notes

•When the projector is moved from a cold location to a warm location, or when the ambient temperature in the projection room has risen suddenly, moisture may condense on the lens or the internal optical section to blur the projected pictures. In such a case, leave the projector for an adequate time (1 to 2 hours, depending on the room’s condition) before using it, so it adjusts to the ambient temperature.

•If the screen is exposed to direct sunlight or other strong light, the projected picture becomes too faint to see. Shut out the light with curtains or other means.

•If the screen and the projector are not installed properly, the projected picture may be distorted.