Toshiba TLPX10E FULL MENU settings - Audio continued, After the settings are finished, press EXIT

FULL MENU settings – Audio (continued)

CONTENTS 61

Remote control			Control panel
			(Main unit side)
			AUTO	AUTO
INPUT		ON/STANDBY	KEYSTONE	SET
	LASER
KEYSTONE	AUTO	SET	VOL/ADJ.		4
L-CLICK		R-CLICK
VOLUME/ADJUST			4 ENTER	EXIT	5
			MENU	INPUT
MENU	ENTER EXIT		5	ON/STANDBY
PIP	FREEZE
CALL	MUTE	RESIZE	TEMP LAMP ON

BUSY FAN

4	Press VOL/ADJ (+/-) to adjust and set.
	Speaker output

When set to “Off”, no sound is produced from the speakers.

Channel select

L+R: The sound of the left and right channels is mixed and developed from the speakers.

L:To develop only left input audio signal from the speakers.

R:To develop only right input audio signal from the speakers.

		Loudness
		When set to “On”, the loudness effect is added to the speaker
		sound.
5	EXIT	After the settings are finished, press EXIT.

The menu screen disappears.

EXIT

Notes

•If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not stored in the memory.

•The “Audio” settings are applied to all the input sources. (It is impossible to change the settings for each input source.)

•The settings do no affect on the audio output signals from the AUDIO OUT jack.

•If either the memory card input or the document imaging camera input mode (for models with document imaging camera) is selected, the sound is not developed.

Settings	Adjustments
	&