Toshiba TLPX10E Press VOL/ADJ +/ - to adjust and set, Settings, Adjustments, Continued

QUICK MENU adjustments and settings (continued)

CONTENTS 50

Control panel

Remote control			(Main unit side)
			AUTO	AUTO
INPUT		ON/STANDBY	KEYSTONE	SET
	LASER
KEYSTONE	AUTO	SET	VOL/ADJ.

3-a

L-CLICKR-CLICK

VOLUME/ADJUST		3-a	ENTER	EXIT
			MENU	INPUT
MENU	ENTER EXIT			ON/STANDBY
PIP	FREEZE
CALL	RESIZE
	MUTE		TEMP LAMP ON
			BUSY	FAN

When selecting “Contrast”, “Brightness”, “Color”, “Phase”, “Keystone”, “Picture mode”, “Lamp power”, “Auto. demo” or “Shutter” in step 2.

3-a	Press VOL/ADJ (+/-) to adjust and set.
	Adjustments
	Items	Buttons	(-)	(+)
	Contrast		Lower	Higher
	Brightness		Darker	Brighter
	Color		Thinner	Deeper
	Phase		Adjust flickers	Adjust flickers
	Keystone		Reduce the lower width	Reduce the upper width

Settings

Picture mode (Analog RGB input, digital RGB input)

Bright: Set the picture with its brightness priority.

True color: Set the picture with its quality (color) priority.

Lamp power

Hi:	Set the lamp mode with brightness priority.
Low:	Restrict the lamp output to reduce the cooling sound.

Auto. demo (Memory card input)

On: When a memory card is detected while the memory card input mode is selected, a slide show using the image data in the root directory starts automatically.

Shutter (Document imaging camera input)

Set to the frequency (50/60 Hz) of the power supply in your area.

Note

The cooling sound changes according to the temperature inside the projector. When the lamp power setting is changed, the brightness changes immediately, but the cooling sound level does not change immediately.

Continued

Settings	Adjustments
	&