ENGLISH
Training names :
Your phone lets you assign voice tags to any phonebook entry. With TT01, you can use those tags to call your contacts, by pressing the green button and saying the name after hearing the 'beep'.
∙Flip your phone open, select the “PHONEBOOK” shortcut in the “closed flip connections” window.
∙Select a name from the list, click the “EDIT” option, click “EDIT CONTACT”.
∙Click the VOICE DIALING shortcut and speak after the tone.
∙Escape by clicking DONE several times
IMPORTANT: Record voice tags while holding the phone to your ear.
Answer/Busy voice commands :
Your phone lets you pick up or reject incoming calls using vocal commands. First you must record the two vocal commands corresponding respectively to “ANSWER” and “BUSY”.
∙You must first activate the ANSWER/BUSY voice commands as follows:
∙Flip your phone open and select the “TELEPHONE” icon in the toolbar.
∙In the “SETTINGS” menu, select “PREFERENCES”.
∙In the “VOICE CONTROL” item, activate the “VOICE AN SWER” option.
Answer/Busy voice commands : Please note that, when this option is activated, you will not hear the rings from incoming calls from the kit, but only from the telephone itself. Rings from the kit are deactivated to let you use the voice commands option.
Caller ID :
During an incoming call, your telephone is able to identify and display the caller's name, if it is recorded in your phonebook and a voice print has been assigned to it.
∙To do this, you need to activate the CALLER ID option as follows:
∙Flip your telephone open and choose the “TELEPHONE” icon from the toolbar.
∙From the “SETTINGS” menu, press “PREFERENCES”
∙In the VOICE CONTROL item, activate the “CALLER ID” option
Caller ID: when this function is enabled, if the caller’s name is memorized in the phone book, you will hear the name directly from the speakers
Caller ID :
Your telephone lets you hear the caller's name, if it is recorded in your phonebook and a voice print assigned to it.
To do this you need to activate the “READ CALLER’S NAME” option.
∙Flip your telephone open, select the “TELEPHONE” icon in the tool bar.
∙In the “EDIT” menu press on “PREFERENCES”, then cho ose the “VOICE CONTROL” phone book
∙Activate the “READ THE CALLER’S NAME” option.
Caller ID : Attention, when this option is activated, you will not hear the rings from incoming calls from the kit. The rings are intentionally disabled to let you hear the caller’s name. You can still answer an incoming call by pressing the green button
14