ENGLISH
MEMORIZATION OF VOICE TAGS | SIEMENS |
Your telephone allows you to use the TT01’s memory to record voice tags associated to the names in the phone book. With the TT01, it is possible to use this feature to recall names from the phone book by pressing the green button and repeating the name after the tone “beep” (as seen in the paragraph “Making a call in TOUCH&TALK mode”).
Procedure:
Press and hold the red button, the phone book will then be displayed on the telephone.
Select a name and press “Select”, after which follow the voice instructions.
PAIRING
ERICSSON and Sony Ericsson: R520, T39, T68, T68M, T68i
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your TT01. Once this is done, connection between your telephone and your
IMPORTANT : the hands free kit is operative only when the car ignition is on (IGN). For Ericsson R520m, T68 and T39, the infrared (IrDA) function has to be disabled for TT01 to operate correctly. Comply with the following recommendations: Go into the Menu, go to "Extras"; until " Infrared port", press "Yes", then until "Disabled" and confirm by pressing "Yes".
Procedure :
Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following sequence on Ericsson R520m, T68, T68M, T68i and T39 telephones. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.
After turning on the ignition of your car, carry out the following sequence for Ericsson R520m, T68/T68m and T39/T39m telephones.
For the T68 and T68i, go to "Connect", then "Bluetooth®", then follow the instructions below. |
| ||
For the R520 and the T39, press | until "Extras", then | until "Bluetooth®" and press "Yes". Press | until "Paired |
devices", press Yes. Press "Add device", and "Yes ". | Select "Phone initiates", press "Yes" then press | and select | |
"Headsets", press "Yes", then "Prepare headset" is displayed. "Searching" is displayed. |
| ||
When "TT01 CK3.xx" is displayed, click on "Yes".
"Add to connected devices" - press "Yes". "Connection key" or “Enter Password” is displayed, enter 1234, then press "Yes". The connection phase is now complete and "Pairing succeeded" is displayed on your screen.
For further information, please refer to your Ericsson or Sony Ericsson telephone’s instructions.
PAIRING
ERICSSON and Sony Ericsson: T606, T608, T610, T616, T618, T630, Z600, Z608
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your TT01. Once this is done, connection between your telephone and your
IMPORTANT : the hands free kit is operative only when the car ignition is on (IGN). For Ericsson T610, the infrared (IrDA) function has to be disabled for TT01 to operate correctly. Go into the main Menu, select "CONNECTIVITY" scroll to IR activation, select "DISABLED" and confirm by pressing "SELECTION".
Procedure :
Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.
Your phone is on. Turn on the ignition key. Proceed with the following sequence to do the pairing
Select “ CONNECTIONS”, then “BLUETOOTH®”. Select “HANDS FREE” and validate by clicking on “SELECTION”. “PERS.HANDS FREE” is indicated on the display, validate with “SELECT”, then “NEW HANDS FREE”, then sel ect “Add” “Searching for hands free devices” «WAIT» is displa yed. The T610 phone looks for all devices equipped with a hands free profile. After a few seconds «TT01 CK3.xx» is displ ayed, validate by clicking on “SELECT”, enter 1234 as passkey and confirm. The pairing phase comes to an end when «TT 01 CK3.xx added to my peripherals» is displayed.
9